7C0358 GASKET Caterpillar parts
120H, 120H ES, 120H NA, 135H, 135H NA, 214, 30/30, 3114, 3116, 3126, 3126B, 3126E, 533, 539, 543, 561M, 928G, 938F, 938G, 950F, 950F II, 950G, 953C, 960F, 962G, 963B, 963C, AP-1000, AP-1000B, AP-1050,...
Rating:
Alternative (cross code) number:
CA7C0358
7C-0358
7C0358
CA7C0358
7C-0358
7C0358
Weight: 0.01 pounds 0 kg.
ASPHALT PAVER, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$12.26
01 Dec 2023
US: Florida-Parts-Z
7C0358 - Gasket for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$12.26
14 Apr 2022
US: Florida-Parts-Z
7C0358 - Gasket for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$7.47
25 Oct 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR GASKET 7C0358 NEW
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 7C0358:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
3/8 - 16 by 4 inch 2
B 369-9451 Grease -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01053285
Install the O-ring seals on bolts (19). Position base assembly (18) on the cylinder block and install bolts (19).
Install Tooling (A) in the base assembly. Install gasket (20) on Tooling (A).
Attach a suitable lifting device to aftercooler core (11). The weight of the aftercooler core is approximately 14 kg (31 lb).
Install aftercooler core (11) on Tooling (A).
Install gasket (22) and cover (21) on Tooling (A).
Install O-ring seals (25) on adapters (23). Install the adapters and install bolts (24).
Illustration 2 g01381170
Install bolts (12).
Remove Tooling (A) and install remaining bolts (12).
Install three bolts (13) on the back side of the aftercooler.Note: Check the alignment of the adapters for the aftercooler prior to installation of the tube assemblies.
Install the O-ring seal on tube assembly (9). Apply Tooling (B) to the O-ring seal. Install the retainer sleeve on the tube assembly. Install the tube assembly in the aftercooler.
Align tube assembly (9) with the heat exchanger. Slide hose (7) in position. Tighten hose clamps (8).
Install bolts (10).
Install the O-ring seals on tube assembly (16). Apply Tooling (B) to the O-ring seals. Install elbow (15) on tube assembly (16). Install the retainer sleeve on the tube assembly. Install the tube assembly in the aftercooler.
Tighten clamp assembly (14). Install bolts (17).
Illustration 3 g01053209
Install the O-ring seals on the air pipe. Install adapter (3) on air pipe (6). Position gasket (4) between aftercooler (1) and the adapter. Install the spacers and bolts (2).
Install the plates and bolts (5).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".Note: It is not necessary to fill the cooling system on sea water aftercooled applications.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
3/8 - 16 by 4 inch 2
B 369-9451 Grease -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01053285
Install the O-ring seals on bolts (19). Position base assembly (18) on the cylinder block and install bolts (19).
Install Tooling (A) in the base assembly. Install gasket (20) on Tooling (A).
Attach a suitable lifting device to aftercooler core (11). The weight of the aftercooler core is approximately 14 kg (31 lb).
Install aftercooler core (11) on Tooling (A).
Install gasket (22) and cover (21) on Tooling (A).
Install O-ring seals (25) on adapters (23). Install the adapters and install bolts (24).
Illustration 2 g01381170
Install bolts (12).
Remove Tooling (A) and install remaining bolts (12).
Install three bolts (13) on the back side of the aftercooler.Note: Check the alignment of the adapters for the aftercooler prior to installation of the tube assemblies.
Install the O-ring seal on tube assembly (9). Apply Tooling (B) to the O-ring seal. Install the retainer sleeve on the tube assembly. Install the tube assembly in the aftercooler.
Align tube assembly (9) with the heat exchanger. Slide hose (7) in position. Tighten hose clamps (8).
Install bolts (10).
Install the O-ring seals on tube assembly (16). Apply Tooling (B) to the O-ring seals. Install elbow (15) on tube assembly (16). Install the retainer sleeve on the tube assembly. Install the tube assembly in the aftercooler.
Tighten clamp assembly (14). Install bolts (17).
Illustration 3 g01053209
Install the O-ring seals on the air pipe. Install adapter (3) on air pipe (6). Position gasket (4) between aftercooler (1) and the adapter. Install the spacers and bolts (2).
Install the plates and bolts (5).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".Note: It is not necessary to fill the cooling system on sea water aftercooled applications.
Cat SIS web machinery list:
Parts gasket Caterpillar catalog:
814B, 815B, 824C, 826C, 834B, 836, 950B, 950F, 966D, 966F, 980C, 980F, 988B, 992C, 994
950F, 950F II, 960F
950F, 950F II, 960F
950F, 950F II, 960F
950F, 950F II, 960F
950F II, 960F
824B, 824G, 824G II, 824H, 834, 854G, 854K, 988, 992, AP-1050, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9L
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12M, 135H, 135H NA
120, 120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 160G, 160H, 160H ES, 1...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16G
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
30/30, 3116, 3126, 3126B, 3126E, 320 L, 550, 570, 570B, 574, 580, 580B, 928G, 938F, 938G, 950F, 950G, 962G, AP-1000, C7, CB-634, CB-634C, CP-563, DEUCE, IT28G, IT38F, IT38G, M318, M320
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 320 L, 320B, 322B L, 322B LN, 325B L, 35, 45, 561M, 613C II, 928G, 938F, 950F, 950F II, 953B, 953C, 960F, 963B, 963C, AP-1000, AP-1000B, AP-1050, AP-1055B,...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3116, 320 L, 320B, 322B L, 322B LN, 325 L, 325B L, 45, 561M, 613C II, 928G, 938F, 950F, 950F II, 953B, 953C, 960F, 963B, AP-1000, AP-1000B, AP-1050, AP-105...
214B, 3116, 320 L, 322B, 325, 325 L, 325B, 45, 613C II, 938F, 950F, 950F II, 953B, 960F, AP-1000, AP-1050, CB-634C, CP-563, CS-531, CS-583, CS-583C
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 322B L, 322C, 322C FM, 325, 325B, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 928G, 938F, 938G, 950F, 95...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 92...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, 533, 535...
120H, 214B, 3116, 3126, 322C, 325, 325 L, 325B, 325C, 550, 570, 574, 580, 950F, 950F II, 950G, 960F, 963B, CP-563, CS-531C, CS-531D, CS-533C, CS-533D, CS-563C, CS-563D, CS-573C, CS-573D, CS-583C, CS-5...
120H, 214B, 3116, 3126, 322C, 325, 325 L, 325B, 325C, 950F, 950G, 953B
120H, 120H ES, 120H NA, 135H, 135H NA, 1676, 205B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 LN, 325B, 325B L, 345B, 345B L...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 LN, 325B, 325B L, 345B, 345B II, 345...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 205B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D ...