GASKET-OIL PAN 7H2415 - Caterpillar

7H2415 GASKET-OIL PAN Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7H2415
7H-2415
7H2415

Weight: 0.30 pounds 0 kg.

Buy GASKET-OIL PAN 7H2415 Caterpillar genuine, new aftermarket tractor parts with delivery

For full view, you need register

Information:

Remove six screws (19), six hard washers (20), and three cover assemblies (18). Retain all hardware.
Illustration 4 g06079834
(21) 8T-4196 Bolt
(22) 8T-4121 Hard Washer
(23) 8T-5441 Bracket
(24) 8T-5442 Clip
Remove one bolt (21), one hard washer (22), one bracket (23), and one clip (24). Retain all hardware.
Illustration 5 g06080165
(1) 230-2536 Clamps
(2) 284-4304 Hose
(3) 251-0038 Clamps
Install one hose (2), two clamps (1), and two clamps (3).
Illustration 6 g06080742
Illustration 7 g06080806
(1) 230-2536 Clamps
(2) 284-4304 Hose
(3) 251-0038 Clamps
(4) 231-3264 Clamp
(5) 262-7104 Elbow
(6) 230-2536 Clamps
(7) 458-8738 Tube As
(8) 297-4853 Sensor Harness As
(9) 291-9976 Bracket
(10) 8T-4121 Hard Washer
(11) 344-5675 Nut
(12) 8T-4186 Bolt
(13) 198-4777 Hard Washer
(14) 204-2281 Cable Strap
(15) 204-8000 Cable Tie Mounting
(16) 130-5300 Clip
(17) 8T-4136 Bolt
Install one hose (2), two clamps (1), and two clamps (3) onto tube assembly (7).Note: Do not tighten the clamps to a final torque at this time.
Install one elbow (5), two clamps (4), and two clamps (6) onto tube assembly (7).Note: Do not tighten the clamps to a final torque at this time.
Install sensor harness assembly (8). Install one clip (16), one washer (10), one bolt (17) onto tube assembly (7).
Install one bracket (9), one hard washer (13), two hard washers (10), one cable tie mount (15), one bolt (12), one nut (11), and one cable strap (14) onto tube assembly (7).
Install two cable tie mounts (15), two hard washers (10), and two bolts (17), and two cable straps (14) onto tube assembly (7).
Illustration 8 g06080899
Illustration 9 g06080856
(1) 230-2536 Clamps
(2) 284-4304 Hose
(3) 251-0038 Clamps
(4) 231-3264 Clamp
(5) 262-7104 Elbow
(1) 230-2536 Clamps
(7) 458-8738 Tube As
(8)
(21) 8T-4196 Bolt
(22) 8T-4121 Hard Washer
(23) 8T-5441 Bracket
(24) 8T-5442 Clip
Position tube assembly (7). Install one clip (24), one bracket (23), one washer (22), and one bolt (21)
Tighten clamps (1), clamps (3), clamps (4), and clamps (6).
Connect sensor harness assembly (8).
Repeat Step 1 through Step 11 for the opposite side.
Illustration 10 g06080984
(18) 303-8553 Cover As
(19) 8C-8585 Screws
(20) 8T-4121 Hard Washers
Install three cover assemblies (18), hard washers (20), and six screws (19).