GASKET 7N6228 - Caterpillar

Do not attempt to assemble this machine until you read and you understand the assembly instructions.Improper assembly procedures could result in injury or death.
Required Parts
Table 1
448-4852 Front Fender Gp    
Item    Qty    Part Number    Description    
1     1     201-6775     Front Fender As    
2     1     201-6776     Front Fender As    
3     1     201-6780     Plate    
4     1     201-6781     Plate    
5     12     198-4777     Hard Washer (1)    
6     8     8T-4183     Bolt    
7     12     8T-4186     Bolt (2)    
8     8     8T-4223     Hard Washer    
( 1 ) Ten Hard Washers are used for 950H and 962H machines. Twelve Hard Washers are used for 950H and 962H machines
( 2 ) Ten Bolts are used for 950H and 962H machines. Twelve Bolts are used for 950H and 962H machinesMachine Preparation
Park the machine on a smooth, level surface. Move away from other operating machines and away from personnel. Lower the implements to the ground. turn the engine start switch to the OFF position.
Park the machine on a smooth, level surface. Move away from other operating machines and away from personnel. Lower the implements to the ground. turn the engine start switch to the OFF position.
Permit only one operator on the machine. Keep other personnel away from the machine or in sight of the operator.
Engage the parking brake. Put blocks in front of the wheels and behind the wheels.
Install the steering frame lock in the LOCKED position so the machine cannot articulate.Procedure
Illustration 1 g03732786
(A) Bolts (B) Washers (C) Right Front Fender Assembly
Remove the Right Front Fender Assembly (C) by removing six Bolts (A) and six Washers (B) from the inner right-side front fender well. Refer to Illustration 1.
Repeat Step 1 to remove the Left Front Fender Assembly.
Illustration 2 g03732792
For 966H and 972H machines (4) 201-6781 Plate (5) 198-4777 Hard Washer (7) 8T-4186 Bolt
Illustration 3 g03732825
For 966H and 972H machines (4) 201-6781 Plate (5) 198-4777 Hard Washer (7) 8T-4186 Bolt
For 950H and 962H machines, assemble Plate (4) to the right side of the machine using five Bolts (7) and five Hard Washers (5). Refer to Illustration 3.Note: For 950H and 962H machines, assemble Plate (4) to the right side of the machine using six Bolts (7) and six Hard Washers (5). Refer to Illustration 3
Repeat Step 3 to install Left Front Plate (3) .
Illustration 4 g03732827
(2) 201-6776 Front Fender As (4) 201-6781 Plate (6) 8T-4183 Bolt (8) 8T-4223 Hard Washer
Assemble Front Fender As (2) to Plate (4) at the right side of the machine. Use four Bolts (6) and four Hard Washers (8). Refer to Illustration 4.
Repeat Step 5 to install Front Fender As (1) to Left Front Plate (3) .