7N6758 GASKET 2.90 mm(.114 in.) Caterpillar parts
D8K
Rating:
Alternative (cross code) number:
CA7N6758
7N-6758
7N6758
CA7N6758
7N-6758
7N6758
Weight: 0.02 pounds 0 kg.
Information:
ID
29
mm
OD
37.3
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
25 Feb 2018
11 Hundredths Pounds
CTP: CTP
Caterpillar GASKET (7N6758)
7N6758 Weight(lbs): 0.10 Length(cm): 7.6800 Width(cm): 7.6800 Depth(cm): 1.2700
7N6758 Weight(lbs): 0.10 Length(cm): 7.6800 Width(cm): 7.6800 Depth(cm): 1.2700
Number on catalog scheme:
24
For full view, you need register
Compatible equipment models: 7N6758:
Information:
If the crankcase breather is not maintained regularly, the crankcase breather will become plugged. A plugged crankcase breather will cause excessive crankcase pressure that may cause crankshaft seal leakage.
Illustration 1 g06054183
Loosen clamp (1).
Remove both breathers as a unit.
Illustration 2 g06054197
Remove two clamps (2). Remove hose tee (3).Inspect the hose tee for cracks. If the tee is cracked, discard the old tee and obtain a new tee for installation.
Turn the breathers (4) upside-down to inspect the condition of the breather elements.Clean the breather elements with clean, nonflammable solvent. If the breather elements remain contaminated after the cleaning, discard the breathers and obtain new breathers. Do not attempt to disassemble the breathers.Allow the breather elements to dry before installation.Note: Coat the rubber parts with clean engine oil or petroleum jelly.
Place clamps (2) over the parts of hose tee (3) that will receive breathers (4). Install the breathers into the tee. Tighten the clamps to the torque that is listed in the Service Manual, "Specifications".
Coat O-ring seals, if applicable with clean engine oil. Place the O-ring seals on the valve covers.
Place clamps (2) around the parts of the breathers that will be attached to the valve covers. Install both breathers as a unit. Tighten the clamps.
Illustration 1 g06054183
Loosen clamp (1).
Remove both breathers as a unit.
Illustration 2 g06054197
Remove two clamps (2). Remove hose tee (3).Inspect the hose tee for cracks. If the tee is cracked, discard the old tee and obtain a new tee for installation.
Turn the breathers (4) upside-down to inspect the condition of the breather elements.Clean the breather elements with clean, nonflammable solvent. If the breather elements remain contaminated after the cleaning, discard the breathers and obtain new breathers. Do not attempt to disassemble the breathers.Allow the breather elements to dry before installation.Note: Coat the rubber parts with clean engine oil or petroleum jelly.
Place clamps (2) over the parts of hose tee (3) that will receive breathers (4). Install the breathers into the tee. Tighten the clamps to the torque that is listed in the Service Manual, "Specifications".
Coat O-ring seals, if applicable with clean engine oil. Place the O-ring seals on the valve covers.
Place clamps (2) around the parts of the breathers that will be attached to the valve covers. Install both breathers as a unit. Tighten the clamps.
Caterpillar parts catalog:
Parts gasket Caterpillar catalog:
120, 120B, 12E, 12F, 140, 140B, 140G, 143H, 14E, 16, 160H, 215, 225, 225D, 227, 229, 229D, 235, 235B, 235C, 235D, 245, 245B, 245D, 24H, 24M, 3306, 3412, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3...
16, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 215, 245, 3304, 3306, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 621, 621B, 621R, 623, 627, 631C, 631E, 637D, 637E, 641B, 650B, 651E, 657B, 657E,...
3192, 594, 621, 631C, 633C, 7241, 7261, 953, D337, D342, D342C, D364, D379, D397D, D398, D399, D8H, D8K, D9G, D9H, G342C, G379, G398, G399
1673C, 1674, 1693, 3306, 518, 621R, 631C, 777, 824B, 941, 950, 951B, 966C, 992, D10, D334, D343, D348, D4D, D5, D6C, D6D, D7F, D7G, D8H, D8K
16, 1673C, 1674, 1676, 1693, 16G, 3304, 3306, 3406, 3408, 3412, 561C, 621B, 623, 631C, 637D, 641B, 650B, 657B, 772, 777, 824B, 824C, 826B, 826C, 941, 943, 950, 977K, 980B, 983, 988B, 992, D10, D343, D...
3406, 3406C, 3408, 3412, 3512, 5130, 5130B, 5230, 5230B, 583K, 651E, 657E, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 777B, 785, 789, 992C, 992D, 994, 994D, 994F, 994H, D348, D353C, D8H, D8K, D9E, D9L
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
561B, 561C, 561D, 613B, 613C, 615, 615C, 621, 621B, 621R, 627B, 633D, 637D, 977D, 977H, D5, D5B, D5E, D8H, D8K
16, 583K, 594, 594H, 826C, 916, AD30, D250D, D25C, D30C, D350C, D35C, D5B, D6D, D6E, D6G2 LGP, D6G2 XL, D6H, D7G, D7G2, D7R XR, D8H, D8K, D9G, D9H, D9N, IT28, R1600, R1600G
583K, D8K
583H, 583K, D8H, D8K
D8H, D8K
D342, D8K, G342C
140G, 1673C, 235, 571G, 572G, 637D, 966C, D25C, D300B, D30C, D350C, D35C
D353C, D9H
1673C, 3304, 3306
3304, 920, 930, 941, 950, 955L, D4D, D4E
120G, 140B, 1673C, 215, 3304, 3306, 920, 930, 941, 950, 977K, D4D, D4E, D5, D6C, G3304, G3306
5N3276
GASKET
3208
3208
9B8854
GASKET
D315
D315
9B8895
GASKET
D315
D315
594, D353C, D9E, D9G, D9H
594, D353C, D9G, D9H
D342, D342C, D8H, D8K