GASKET KIT- 8C8713 - Caterpillar

REBE9516-04
22Feb2013
(Revised 09Aug2016)
U-75
A-60
D-68
O-72
TM-4
Safety
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE ELECTRICAL CONNECTOR ON THE DOSING CABINET FOR RETROFIT SELECTIVE CATALYTIC REDUCTION SYSTEMS EQUIPPED ON CERTAIN D399 INDUSTRIAL ENGINES, 3512C, AND C175-16 PETROLEUM ENGINES, C280-12 ENGINES, C32, 3412C, 3516B, 3516C, G3516, AND C175-16 GENERATOR SETS, PM3516, AND PM3516B POWER MODULES
108D 108H 1408 PI10920
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
This Program must be administered as soon as possible.When reporting the repair, use "PI10920" as the Part Number and "7751" as the Group Number, "56" as the Warranty ClaimDescription Code and "T" as the SIMS Description Code.
Exception: If the repair is done after failure, use "PI10920" as the Part Number, "7751" as the Group Number,"96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
This Revised Service Letter replaces the 22Feb2013 (Revised 29Jan2014) Service Letter. Changes have been made to the Parts Needed, and Action Required.
PROBLEM
The pin/socket gender needs to be reversed on certain dosing cabinets that are used with retrofit selective catalytic reduction systems. When the dosing cabinet is supplied with electrical power, the pin side of the connector on top of the cabinet has a 115 240 VAC potential. When the tube wire bundle is not connected to the cabinet, the energized pin is exposed and a shock hazard exists that can result in the risk of per