GASKET 8F5118 - Caterpillar

(1) Bore in bearing for piston pin (new) ... 43.210 0.008 mm (1.7012 .0003 in.) Diameter of piston pin (new) ... 43.175 0.005 mm (1.6998 .0002 in.)Maximum permissible clearance between bearing and piston pin (worn) ... 0.08 mm (.003 in.)(2) Bore in connecting rod for bearing ... 82.550 0.013 mm (3.2500 .0005 in.)(3) Distance between center of piston pin and center of crankshaft bearing (new) ... 243.71 0.03 mm (9.595 .001 in.)(4) Torque on nut for connecting rod: a. Put engine oil on threads and nut seat.b. Tighten both nuts to ... 40 4 N m (30 3 lb.ft.)c. Mark each nut and end of bolt.d. Again tighten both nuts (from mark) ... 90°Install the connecting rod in the piston with the slot for the bearing tab on the same side as the V mark on the piston.Make reference to Special Instructions, Form No. GMG02394 and SMHS7366 for information about checking and reconditioning connecting rods.