GASKET 8F6647 - Caterpillar

Electric Power Generation3516C GEN SET (S/N: SBK900-2696)3516E GENSET (S/N: JD71-101)C175-16 GEN SET (S/N: WYB108-2190)Engine3516B (S/N: PBR667-668)3516C (S/N: SBJ1341-2123; SFJ604-787; SCK115-1003; SEK114-1258; SFK114-121)3516E (S/N: LCK103-118)C175-16 (S/N: WYC1-2015)C175-20 (S/N: BXR103-2010)G3516H (S/N: NWH106-139; GLM117-183)G3520C (S/N: GZB283-283)G3520H (S/N: GFP116-188; GFR1-207)Generator SetCG170-16 (S/N: KSJ164-167)Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.The new space heaters are 120V 500W and will use the same harness and a series connection we currently use.For units in the field the space heaters can be found installed inside or outside of the bearing bracket. If the heaters are installed inside the bearing bracket a relocation of the grease tube will be required, see the instantiation procedure for more details.Caterpillar Channel 1 Videos
For supplemental information on this procedure, refer to the following video. The previous training has been replaced with the video below.Note: A CWS login is required to access Caterpillar Channel 1. Scan the QR code below with a QR enabled device or copy the link that follows.
Illustration 1 g06306276https://channel1.mediaspace.kaltura.com/media/Introduction+to+Visualization+Service+Procedures+%28VSP%29/1_92vjr92v
Safety Section
Improper operation, lubrication, maintenance, or repair of this product can be dangerous and could result in injury or death.The information, specifications, and illustrations in this publication are based on information that was available at the time that the publication was written. The specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time. These changes can affect the service that is given to the product. Obtain the complete and most current information before you start any job. Cat dealers have the most current information available.Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If the tools, the procedure, the work method, or your actions are not recommended by Caterpillar, ensure that the tools and your actions are safe for you and for others.Ensure that all personnel are safe when using a tool, procedure, work method, or operating technique not recommended by Caterpillar. Ensure that the product will not be damaged or the product made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is