GASKET 8S0583 - Caterpillar

Remove Turbocharger Regulator Assembly
Left hand turbocharger regulator assembly removal is shown. 1. Disconnect tube assembly (1) from regulator assembly.2. Remove four nuts (2) and regulator assembly (3) from turbocharger. 3. Remove shield (4) from turbocharger. 4. Remove gasket (5) from turbocharger.Install Turbocharger Regulator Assembly
1. Put gasket (2) and shield (1) in position on turbocharger. 2. Put regulator assembly (3) in position and install four nuts. Connect tube assembly (4) to regulator.Disassemble And Assemble Turbocharger Regulator Assembly
start by:a) remove turbocharger regulator assembly 1. Remove breather assembly (1) from cover. Put identification on the two bolts used to fasten identification plate (3) for installation purposes.2. Remove plate and five bolts (2) from assembly. 3. Remove cover (4), shims (5), spacers (6) and spring (7) from base assembly. 4. Remove nut (8) to disassemble base assembly. 5. Remove retainer (12), diaphragm (11), plate (10), washer (15) and valve (13) from base (14).6. Inspect gasket (9) on the base and make a replacement if damaged.7. Put valve (13) in position in base and install washer (15), plate (10), diaphragm (11), retainer (12) and nut (8). Tighten nut to a torque of 55 5 lb.in. (6.3 2.3 N m).8. Put spring (7), spacers (6), shims (5) and cover (4) in position on the base assembly and install five bolts in their correct location. Tighten bolts to a torque of 55 5 lb.in. (6.3 2.3 N m).9. Install identification plate (3).10. Install breather assembly (1).end by:a) install turbocharger regulator assembly