GASKET 8W2554 - Caterpillar

Required Parts
Table 1
Required Parts    
Item    Qty    Part No.    Part Name    
1     1     297-9080     Strip    Step Support Replacement Procedure
The following procedure is to be used for replacement of the step support.
Illustration 1 g03450417
(1) 297-9080 Strip (2) Bolts (3) Hard Washers (4) Step Support (5) Step (6) Nuts (7) Spacer
Remove hardware, bolts, nuts, washers, and spacers from top of step support on hanging step. Removed hardware will be reused.
Remove top bolts (2), washers (3), nuts (6), and spacers (7) where step support (4) is attached to machine. Refer to illustration 1.
Remove hardware from the lower step (5) .
Attach the new step support to the lower step reusing the removed hardware from the lower step.
Attach step support to machine with two bolts (2), two hard washers (3), two nuts (6), one strip (1), and the previously removed spacers (7). Refer to illustration 1.