GASKET 9H8644 - Caterpillar

Table 1
An EC Declaration of Conformity document was provided with the product if manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the product. The extract shown below from an EC Declaration of Conformity for product that are declared compliant to "2006/42/EC" applies only to those products originally "CE" marked by the manufacturer listed and which have not since been modified.    
   
EC DECLARATION OF CONFORMITY OF MACHINERY
   
   
Manufacturer:CATERPILLAR INC. 100 N.E. ADAMS STREET PEORIA, IL 61629 USA
   
Person authorized to compile the Technical File and to communicate relevant part of the Technical File to the Authorities of European Union Member States on request:
   
    Standards & Regulations Manager,Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France    
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder    
Description:
    Generic Denomination:     Petroleum Engine        
    Function:     Well Service            
    Model/Type:     3512            
    Serial Number:                
    Commercial Name:     Caterpillar            
Fulfills all the relevant provisions of the following Directives        
                           
    Directives     Notified Body    
Document No.        
    2006/42/EC     N/A            
    2006/95/EC     N/A    
       
    2004/108/EC     N/A            
    2000/14/EC amended by 2005/88/EC, Note (1)     Note (2)            
                           
Note (1)     Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A)
Engine Power per ____-____ kW Rated engine speed - _____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File
       
Note (2)     Notified body name and address        
           
Done at:
            Signature            
Date:
            Name/Position            
                           
Note: The above information was correct as of October, 2009. The information may be subject to change. Refer to the individual declaration of conformity issued with the machine for exact details.