GASKET-LINE 9L8015 - Caterpillar

System configuration parameters are parameters that affect emissions and power of the engine applications. Default values for the parameters are programmed at the factory. Some parameters may be changed by the customer in order to suit the needs of the specific application. System configuration parameters consist of "Selected Engine Rating Parameters", "Electronic Control Module (ECM) Identification Parameters", "Security Access Parameters", "Engine/Gear Parameters", "I/O Configuration Parameters" and "System Parameters". The "ECM Identification Parameters" must be programmed if the ECM is replaced and/or if you reprogram the engine rating. If a new personality module is flashed, it is not necessary to reprogram the "ECM Identification Parameters". Proper values for these parameters are available on the electronic service tool. Certain configuration parameters are also stamped on the engine information plate.Note: If the parameters that are protected with the factory passwords are changed, the Caterpillar warranty may be voided.Parameter Descriptions
"Rating Configuration"
The "Rating Configuration" is defined by the performance maps in the software."Rated Real Genset Power"
The output power of the engine in kilowatts"Rated Apparent Power"
The kVA rating of the engine"Rating Number"
The "Rating Number" corresponds to the selected set of performance maps for the application. This selected set of performance maps comes out of several unique sets of maps that may be resident in the flash file. The dealer and/or the OEM will need to select the appropriate rating tier, if more than one rating tier is present. The rating tier is A through E."Engine Serial Number"
Program the "Engine Serial Number" to match the engine serial number that is stamped on the engine information plate. If the ECM is replaced, the engine serial number from the engine information plate must be programmed into the new ECM."Equipment ID"
"Equipment ID" allows