GASKET KIT 9M5656 - Caterpillar

(58) Information Display - 10 Amp fuse
(59) VIMS PAS Module - 10 Amp fuse
(60) Cat Detect System - 10 Amp fuse
(61) Indication Module - 10 Amp fuse
(62) HVAC Blower Driver Module - 15 Amp fuse
(63) Keypad Supply - 10 Amp fuse
(64) DEF Tank ECM - 20 Amp circuit breakerCircuit Breakers - Reset
Note: Your machine may not be equipped with all of the circuit breakers that are discussed in this topic.
Circuit Breakers - Depress the button in order to reset the circuit breaker. If the circuit is functioning properly, the button will remain depressed. If the button will not remain depressed, check the appropriate electrical circuit.Main Circuit Breaker
Illustration 4 g03368806
(65) Main circuit breaker located in engine compartment. Main circuit breaker (65) is located in the engine compartment on the right-hand side of the machine.Open the right-hand engine access door to service the main circuit breaker.
(65) Main Circuit - 175 ampCircuit Breakers Located in Operator Cab
Illustration 5 g02855656
Cover removed to show upper and lower fuse blocks of fuse panel
(A) Upper fuse block
(B) Lower fuse block Remove the fuse panel access cover in the back left-hand corner of the cab. The ECM circuit breaker, the upper fuse block, and the lower fuse block are located behind the access cover.Electronic Control Module (ECM) Circuit Breaker
Illustration 6 g02818637
(66) Electronic Control Module (ECM) circuit breaker The Electronic Control Module (ECM) circuit breaker (66) is located next to the upper fuse block.
(66) Electronic Control Module (ECM) - 30 ampCircuit Breakers of Lower Fuse Block (B)
Illustration 7 g02855596
Lower fuse block (B)
( 33) Roading Lamps - 15 Amp circuit breaker
(41) Running Lights - 15 Amp circuit breaker
(52) Engine Start Switch - 15 Amp circuit breaker
(64) DEF Tank ECM - 20 Amp circuit breaker