9X6548 GASKET KIT Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA9X6548
9X-6548
9X6548
CA9X6548
9X-6548
9X6548
Weight: 0.010 pounds 0 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
Compatible equipment models: 9X6548:
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M8 by 90 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Ensure that the water pump is clean and free from wear and damage. If necessary, replace the water pump.
Illustration 1 g02524477
If necessary, install cover (7) to water pump (1). Follow Step 2.a through Step 2.d in order to install the cover.
Clean the gasket surface of cover (7).
Position a new O-ring seal (8) (not shown) onto water pump (1).
Install cover (7) to water pump (1).
Install bolts (6) to cover (7). Tighten the bolts to a torque of 22 N m (195 lb in).
Illustration 2 g02524518
Illustration 3 g02524516
Illustration 4 g01985813
Clean the gasket surface of housing (3).
Install Tooling (A) in Position (X).
Use Tooling (A) in order to align new gasket (2) to housing (3). Install the gasket onto the housing.
Align water pump (1) to Tooling (A). Install the water pump to housing (1). Note: Ensure that the gear of the water pump and the gear of the fuel injection pump mesh.
Install bolts (4) and bolts (5). Refer to Illustration 3. Tighten the bolts finger tight.
Remove Tooling (A) and install remaining bolts (4) and bolts (5).
Tighten bolts (4) and bolts (5) in the sequence that is shown in Illustration 4 to a torque of 22 N m (195 lb in).
Install the hose to the water pump inlet. Tighten the hose clamps.
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. End By:
Install the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M8 by 90 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Ensure that the water pump is clean and free from wear and damage. If necessary, replace the water pump.
Illustration 1 g02524477
If necessary, install cover (7) to water pump (1). Follow Step 2.a through Step 2.d in order to install the cover.
Clean the gasket surface of cover (7).
Position a new O-ring seal (8) (not shown) onto water pump (1).
Install cover (7) to water pump (1).
Install bolts (6) to cover (7). Tighten the bolts to a torque of 22 N m (195 lb in).
Illustration 2 g02524518
Illustration 3 g02524516
Illustration 4 g01985813
Clean the gasket surface of housing (3).
Install Tooling (A) in Position (X).
Use Tooling (A) in order to align new gasket (2) to housing (3). Install the gasket onto the housing.
Align water pump (1) to Tooling (A). Install the water pump to housing (1). Note: Ensure that the gear of the water pump and the gear of the fuel injection pump mesh.
Install bolts (4) and bolts (5). Refer to Illustration 3. Tighten the bolts finger tight.
Remove Tooling (A) and install remaining bolts (4) and bolts (5).
Tighten bolts (4) and bolts (5) in the sequence that is shown in Illustration 4 to a torque of 22 N m (195 lb in).
Install the hose to the water pump inlet. Tighten the hose clamps.
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. End By:
Install the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Caterpillar SIS machinery equipment:
Cat SIS web machinery list:
Parts gasket Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 92...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, 533, 535...
205B, 214B, 3114, 3116, 3126, 320 L, 322B, 325, 325 L, 325 LN, 325B, 446, 910E, 918F, 938G, 950G, 953B, 953C, 962G, 963B, CB-434, CP-563, D250D, E200B, E240C, IT12B, IT18F, IT38G, IT62G, RT100
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325B, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 928G...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55,...
1673C, 1693, 16G, 3114, 3116, 3126, 3176, 3208, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3512, 3512B, 3512C, 3516C, 5130, 5230, 613C, 627B, 627E, 631D, 631...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 1673C, 1...
120G, 120H, 120K, 120K 2, 12G, 12H, 12K, 12M, 130G, 135H, 140G, 140H, 140K, 140K 2, 140M, 143H, 14E, 14G, 14H, 160H, 160K, 160M, 163H, 1673C, 3114, 3116, 3126, 3126B, 3126E, 3176C, 3196, 3304, 3306, 3...
120H, 120H ES, 120H NA, 135H NA, 140M, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 324D, 325B L, 325D, 325D L, 329D L, 35, 45, 525B, 533, 535B, 539, 543, 55, 561M, 561N, 570B, 574, 6...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 224B, 3114, 3116, 3126, 320 L, 325, 325 L, 325B, 55, 918F, 924F, 938F, 950F, CB-434, CB-634, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-583C, D5M...
16G, 16H NA, 245, 245B, 24H, 24M, 3116, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 374D L, 375, 375 L, 385B, 385C, 385C FS, 385C L,...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 224B, 3114, 3116, 3126, 320 L, 325, 325B, 325B L, 613C II, 918F, 928G, 938G, 950F, 950F II, 953B, 962G, CB-434, CP-563, D5M, E200B, E240C, IT28G
3116
5R9051
GASKET KIT
3116
3116
3406, 3408, 3412, 3512, 621, 637D, 980C, 992C, D44B, D550B, D9L, PR-750B
1414376
GASKET AND SEAL KIT
311B, 312B
311B, 312B
1732670
GASKET-COMBUSTION
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
1732669
GASKET-COMBUSTION
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
9EL6087
GASKET & SEAL KITS
R1700 II
R1700 II
3116
4R9803
GASKET KIT
3116
3116