GAUGE PACK GP 1164685 - Caterpillar

Illustration 8 g02571841The pressure sensor sends a PWM signal to the implement ECM indicating system pressure. The duty cycle of the signal will vary in proportion to the system pressure. These PWM signals are inputs to the Implement ECM.Position Sensors
Steering Position Sensor (STIC Control)
Illustration 9 g01444766The sensor is designed to tell the ECM the position of the lever. The operator controls the range through left and right movements, and the sensor sends the signal to the ECM. The sensor generates a PWM signal continuously. The duty cycle of the signal varies in proportion to the position of the lever. Refer to Illustration 3 for a description of the terminals and connections to the ECMs.Steering Spool Position sensor
Illustration 10 g03566490The sensor is designed to tell the ECM the position of