GAUGE AS 1187290 - Caterpillar

Illustration 10 g00753397
Hydraulic oil cooler location (5) Hydraulic oil cooler.The hydraulic oil cooler (5) is mounted in front of the radiator at the front of the engine compartment. Access to the oil cooler is gained by opening the hood and removing the side covers.
Illustration 11 g00753393
The location of the joystick for the pilot operated loader (45) Control lever for the loader bucket (46) Auxiliary control switch (47) Switch for the transmission neutralizer (48) Switch for the all wheel steer (If Equipped)The operator must face forward and the seat must face forward while you move the machine. When you operate the loader control, the operator and the seat must face forward. The loader controls are located on the right side of the operator station. The control lever for the loader bucket (45) controls the following positions of the bucket.The control lever for the loader bucket (45) controls FLOAT, LOWER, RAISE, RETURN-TO-DIG, TILT BACK, and DUMP positions of the bucket.This lever also has a switch (47) in order to neutralize the transmission. The lever also has switches (48) for the all wheel steer or auxiliary loader functions.If the machine is equipped with an auxiliary valve, the auxiliary control switch (46) controls that circuit.
Illustration 12 g00753395
The location of the joysticks for the pilot operated backhoe (49) Control for the Boom and swing, (50) Control for the Stick and bucket, (51) Control for the Extendable stick and (52) Control for the foot operated auxiliary control (if equipped)The operator must rotate the seat in order to operate the backhoe. The operator faces the rear of the machine with the levers for the backhoe in sight.Note: The left side of the machine and the right side of the machine are established by the view when you are operating the controls.With the standard hydraulic excavator control pattern, the control for the stick and swing (49) controls the STICK IN, STICK OUT, SWING LEFT and SWING RIGHT. The control for the boom and bucket (50) controls the BOOM RAISE, BOOM LOWER, BUCKET LOAD, and BUCKET DUMP.With the optional backhoe control pattern, the control for the boom (49) controls the BOOM RAISE, BOOM LOWER, SWING LEFT and SWING RIGHT. The control for the stick (50) controls the STICK IN, STICK OUT, BUCKET LOAD, and BUCKET DUMP.The extendable stick control pedal (51) controls the STICK EXTEND. The extendable stick control pedal (51) controls the STICK RETRACT. The auxiliary pedal (52) controls the pressurized lines of an attachment.
Illustration 13 g00734058
optional switching valve
Illustration 14 g00749555
(1) standard hydraulic excavator pattern (2) optional backhoe control patternThe machine can be equipped with an optional switching valve that changes the pattern of the backhoe controls from the standard hydraulic excavator pattern (1) to the optional backhoe control pattern (2) .Note: There are different combinations of levers and pedals that are available. Refer to the Operation and Maintenance Manual for the different combinations of the levers and pedals that are available.