GAUGE AS-LIQUID LEVEL 1326277 - Caterpillar

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00791102
Attach a suitable lifting device to the stick cylinder (1). Place the stick cylinder (1) in position with a suitable lifting device.Note: The weight of the stick cylinder is 72.6 kg (160 lb).
Illustration 2 g00776311
Install pin (9) .
Install the nut and bolt (8) .
Illustration 3 g00776305
Install pin (7), two washers (6), and the retaining ring (5) .
Illustration 4 g00776299
Connect hydraulic hose (4) .
Illustration 5 g00777370
Connect hydraulic hose (3) and install hose clamp (2) .