GAUGE AS-OIL LEVEL 1346635 - Caterpillar

Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 1 g01117783
Disconnect hose assemblies (1) and (2) .
Illustration 2 g01117784
Remove bolt (3) and the clip.
Illustration 3 g01117791
Remove tube assembly (4) .
Illustration 4 g01117796
Attach a suitable lifting device to stabilizer cylinder (7) . The weight of stabilizer cylinder (7) is approximately 50 kg (110 lb). Remove retaining ring (6) , the pin and the shims. Remove retaining ring (5) , the pin and the shims. Remove stabilizer cylinder (7) .Disassembly and Assembly
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     125-0079     Hydraulic Cylinder Repair Stand Gp     1    
152-4249 Hydraulic Cylinder Repair Stand Gp     1    
B     5P-0960     Grease Cartridge     -    
C     4C-9506     Retaining Compound     -    
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 5 g01444832
(1) Torque for the bolt ... 1050 150 N m (774 111 lb ft) (2) Apply Tooling (B) to the threads of the head. Tighten the head to a torque of 600 130 N m (443 96 lb ft). (3) Lubricate the sealing lips with the lubricant that is being sealed. (4) Apply Tooling (C) to the groove of the wiper seal.Installation Procedure
Illustration 6 g01117796
Attach a suitable lifting device to stabilizer cylinder (7) . The weight of stabilizer cylinder (7) is approximately 50 kg (110 lb). Install stabilizer cylinder (7) .
Install the pin, the shims and retaining ring (6) . Install the pin, the shims and retaining ring (5) .
Illustration 7 g01117791
Install tube assembly (4) .
Illustration 8 g01117784
Install bolt (3) and the clip.
Illustration 9 g01117783
Connect hose assemblies (1) and (2) .