GAUGE GP-OIL LEVEL (DIPSTICK) 1389476 - Caterpillar

INSTALL WINDSHIELD WIPER MOTOR, LINKAGE AND WASHER
1. Put nozzle assembly (1) and spacer (2) in position on the machine.2. Install nut (4) that holds the nozzle assembly. Connect hose (5) to the nozzle assembly. Put clamp (3) in position on hose and tighten.3. Put wiper motor and linkage (6) in position. Install gasket, pivot and two bolts that hold the motor on the outside of the cab.4. Connect ground wire (7). Connect the three lead wires.5. Install cover (8) in front of the steering column.6. Install the nut and rubber cap (10).7. Put the wiper arm assembly (9) in position and install the two nuts that hold it.