GAUGE-TRANSMISSION OIL 1806518 - Caterpillar

Illustration 1 g02750416
Table 1
Specification for 148-4644 Swing Drive Gp
Item Qty Part Specification Description
1 - - Before assembly, apply blue Loctite High Flex GM between the mating surfaces of the ring gear and the housing.
2 1 148-4643 Bearing Before assembly, apply Loctite C5A Copper Anti-seize to the inside diameter, outside diameter the bearing and to the surfaces of the mating parts.
3 1 6V-7238 Shutoff Valve Torque to 28 to 31 N m (248 to 274 lb in).
During shutting off the valve, tighten to a torque of 2.9 0.5 N m (26 4 lb in).
B - - After installation, make the stake marks near the opening of each spring pin hole.
Distance from the edge of the spring pin hole to the stake mark is 2.25 0.75 mm (0.089 0.030 inch).
4 1 095-1022 Roller Bearing Before assembly, apply Loctite C5A Copper Anti-seize to the inside diameter, outside diameter the roller bearing and to the surfaces of the mating parts.
5 2 199-4561 Lip Type Seal Lubricate the sealing lip with the lubricant that is being sealed. Lubricate the circumference with grease when the seal is installed in the cage.