1927619 GAUGE AS-SIGHT Caterpillar parts
725, 730, 735, 740, D350E II, D400E II
Rating:
Alternative (cross code) number:
CA1927619
192-7619
1927619
CA1927619
192-7619
1927619
Weight: 0.17 pounds 0 kg.
ARTICULATED TRUCK, EJECTOR TRUCK,
Compatible equipment models: 1927619:
Information:
Introduction
This Special Instruction outlines the basic steps and procedures to be used in order to install a new control panel for the air conditioning unit or the heating unit. The new 126-8330 A/C Electronic Control Panel replaces 113-8478 A/C Electronic Control Panel and the new 126-8332 Heater Electronic Control Panel replaces 113-8479 Heater Electronic Control Panel .The new control panel will be more usable to the operator.Do not perform any of the procedures until you have read the information in this publication.Required Parts List
Table 1
Required Parts    
Part Number     Description     Quantity    
126-8330     A/C Electronic Control Panel     1    
126-8332     Heater Electronic Control Panel     1    
117-2861     Harness Assembly     1    
115-8051     Plate     1    Machines that are selected for this Procedure
The following machines can be equipped with the new 126-8330 A/C Electronic Control Panel :
312(S/N: 6BL1-UP)
315(S/N: 3ZM1-UP)
317(S/N: 4MM1-UP; 9SR1-UP)
320(S/N: 9WG1-UP; 4ZJ1-UP; 3XK1-UP; 6KM1-UP)
322(S/N: 8ML1-UP; 9RL1-UP; 4RM1-UP; 9JL1-UP)
325(S/N: 9ZK1-UP; 2SL1-UP; 3LL1-UP; 6RM1-UP; 8NK1-UP; 7LM1-UP)
330(S/N: 6ZK1-UP; 8CK1-UP; 2EL1-UP; 2ZM1-UP; 5YM1-UP)
350(S/N: 8HK1-UP; 2ZL1-UP; 3ML1-UP; 8KZ1-UP; 9FL1-UP)
375(S/N: 8WJ1-UP; 6NK1-UP; 6RL1-UP; 9WL1-UP; 1JM1-UP)
5080(S/N: 6XK1-UP; 8SL1-UP)The following machines can be equipped with the new 126-8332 Heater Electronic Control Panel :
312(S/N: 6GK1-UP; 6BL1-UP)
315(S/N: 3ZM1-UP)
317(S/N: 4MM1-UP; 9SR1-UP)
320(S/N: 9WG1-UP; 6KM1-UP; 4ZJ1-UP; 3XK1-UP)
322(S/N: 3LL1-UP; 8ML1-UP; 9RL1-UP; 4RM1-UP; 9JL1-UP)
325(S/N: 6RM1-UP; 9ZK1-UP; 2SL1-UP; 8NK1-UP; 7LM1-UP; 6RM1-UP)
330(S/N: 9WJ1-UP; 6ZK1-UP; 8FK1-UP; 2ZM1-UP; 2ZM1-UP; 2EL1-UP; 5YM1-UP; 5YM1-UP; 8CK1-UP)Procedure for Installing the New Control Panel
Follow this procedure in order to install either of the new control panels. The procedure will outline the basic steps that are need in order to install the 126-8330 A/C Electronic Control Panel . However, the procedure for the 126-8332 Heater Electronic Control Panel is identical.
Illustration 1 g00956646
Location of the old control panel (1) Old control panel (2) Wire harness (3) Screws (4) Left console
Remove old control panel (1) by unscrewing two screws (3). Gently pull out the control panel. This will expose wiring harness (2) .
Unplug wire harness (2) from the back of old control panel (2) .
Illustration 2 g00959697
Left console (5) Cover (6) Screws
Remove cover (5) on the left console by unscrewing four screws (6). This is the new location for the new control panel.
Illustration 3 g00956817
(4) Left console (7) 126-8330 A/C Electronic Control Panel or 126-8332 Heater Electronic Control Panel (8) 117-2861 Wire Harness
Connect 117-2861 Wire Harness (8) to the old harness. Route the 117-2861 Wire Harness through the left console. See Illustration 3.Note: You may need to remove the left console in order to route the wire harness. See the appropriate Disassembly and Assembly Module for the proper procedure that is for your machine.
Connect wire harness (8) to the back of the new control panel.
Place new control panel (7) into position in the left console. Fasten the control panel into the location with the four screws that were removed in Step 3.
Place the 115-8051 Plate into the location of the old control panel. Use the two screws that held the old control panel
This Special Instruction outlines the basic steps and procedures to be used in order to install a new control panel for the air conditioning unit or the heating unit. The new 126-8330 A/C Electronic Control Panel replaces 113-8478 A/C Electronic Control Panel and the new 126-8332 Heater Electronic Control Panel replaces 113-8479 Heater Electronic Control Panel .The new control panel will be more usable to the operator.Do not perform any of the procedures until you have read the information in this publication.Required Parts List
Table 1
Required Parts    
Part Number     Description     Quantity    
126-8330     A/C Electronic Control Panel     1    
126-8332     Heater Electronic Control Panel     1    
117-2861     Harness Assembly     1    
115-8051     Plate     1    Machines that are selected for this Procedure
The following machines can be equipped with the new 126-8330 A/C Electronic Control Panel :
312(S/N: 6BL1-UP)
315(S/N: 3ZM1-UP)
317(S/N: 4MM1-UP; 9SR1-UP)
320(S/N: 9WG1-UP; 4ZJ1-UP; 3XK1-UP; 6KM1-UP)
322(S/N: 8ML1-UP; 9RL1-UP; 4RM1-UP; 9JL1-UP)
325(S/N: 9ZK1-UP; 2SL1-UP; 3LL1-UP; 6RM1-UP; 8NK1-UP; 7LM1-UP)
330(S/N: 6ZK1-UP; 8CK1-UP; 2EL1-UP; 2ZM1-UP; 5YM1-UP)
350(S/N: 8HK1-UP; 2ZL1-UP; 3ML1-UP; 8KZ1-UP; 9FL1-UP)
375(S/N: 8WJ1-UP; 6NK1-UP; 6RL1-UP; 9WL1-UP; 1JM1-UP)
5080(S/N: 6XK1-UP; 8SL1-UP)The following machines can be equipped with the new 126-8332 Heater Electronic Control Panel :
312(S/N: 6GK1-UP; 6BL1-UP)
315(S/N: 3ZM1-UP)
317(S/N: 4MM1-UP; 9SR1-UP)
320(S/N: 9WG1-UP; 6KM1-UP; 4ZJ1-UP; 3XK1-UP)
322(S/N: 3LL1-UP; 8ML1-UP; 9RL1-UP; 4RM1-UP; 9JL1-UP)
325(S/N: 6RM1-UP; 9ZK1-UP; 2SL1-UP; 8NK1-UP; 7LM1-UP; 6RM1-UP)
330(S/N: 9WJ1-UP; 6ZK1-UP; 8FK1-UP; 2ZM1-UP; 2ZM1-UP; 2EL1-UP; 5YM1-UP; 5YM1-UP; 8CK1-UP)Procedure for Installing the New Control Panel
Follow this procedure in order to install either of the new control panels. The procedure will outline the basic steps that are need in order to install the 126-8330 A/C Electronic Control Panel . However, the procedure for the 126-8332 Heater Electronic Control Panel is identical.
Illustration 1 g00956646
Location of the old control panel (1) Old control panel (2) Wire harness (3) Screws (4) Left console
Remove old control panel (1) by unscrewing two screws (3). Gently pull out the control panel. This will expose wiring harness (2) .
Unplug wire harness (2) from the back of old control panel (2) .
Illustration 2 g00959697
Left console (5) Cover (6) Screws
Remove cover (5) on the left console by unscrewing four screws (6). This is the new location for the new control panel.
Illustration 3 g00956817
(4) Left console (7) 126-8330 A/C Electronic Control Panel or 126-8332 Heater Electronic Control Panel (8) 117-2861 Wire Harness
Connect 117-2861 Wire Harness (8) to the old harness. Route the 117-2861 Wire Harness through the left console. See Illustration 3.Note: You may need to remove the left console in order to route the wire harness. See the appropriate Disassembly and Assembly Module for the proper procedure that is for your machine.
Connect wire harness (8) to the back of the new control panel.
Place new control panel (7) into position in the left console. Fasten the control panel into the location with the four screws that were removed in Step 3.
Place the 115-8051 Plate into the location of the old control panel. Use the two screws that held the old control panel
Caterpillar parts catalog:
Parts gauge Caterpillar catalog:
1806518
GAUGE-TRANSMISSION OIL
725, 730
725, 730
1806517
GAUGE AS
725, 730
725, 730
3022723
GAUGE AS-OIL LEVEL (DIPSTICK)
735, 735B, 740, 740B
735, 735B, 740, 740B
3268989
GAUGE-OIL LEVEL
735, 740
735, 740
1981187
GAUGE
735
735
2152866
GAUGE-TRANSMISSION OIL
735, 740
735, 740
3268987
GAUGE AS-OIL LEVEL
725, 730
725, 730
2778249
GAUGE-OIL LEVEL
735, 735B, 740, 740B
735, 735B, 740, 740B
3268991
GAUGE-OIL LEVEL
735, 740
735, 740
1300987
GAUGE-SIGHT
69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D
69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D
3128847
GAUGE AS-OIL LEVEL (DIPSTICK)
785C, 789C, 789D, 793C, 793D, 797, 797B
785C, 789C, 789D, 793C, 793D, 797, 797B
1170043
GAUGE AS-OIL LEVEL
776D, 777, 777D
776D, 777, 777D
1151782
GAUGE AS-FUEL LEVEL
769D, 771D, 773D, 775D, 776D, 777D
769D, 771D, 773D, 775D, 776D, 777D
5U2880
GAUGE-OIL LEVEL
D250B, D25C, D25D, D300B, D30C, D350C, D350E, D35C, D35HP, D400, D400E, D40D, D44B, D550B
D250B, D25C, D25D, D300B, D30C, D350C, D350E, D35C, D35HP, D400, D400E, D40D, D44B, D550B
3147780
GAUGE AS-OIL LEVEL (DIPSTICK)
777C, 777D, 777F
777C, 777D, 777F
3030956
GAUGE GP-SIGHT
769D, 770, 771D, 772, 773E, 773F, 775E, 775F, 776D, 777D, 777F, 777G, 785D
769D, 770, 771D, 772, 773E, 773F, 775E, 775F, 776D, 777D, 777F, 777G, 785D
2465590
GAUGE AS-OIL LEVEL (DIPSTICK)
784C, 785C
784C, 785C
1667778
GAUGE-OIL LEVEL (DIPSTICK)
D400E II
D400E II
1927620
GAUGE-SIGHT
554, 735, 740, D350E II, D400E II
554, 735, 740, D350E II, D400E II