GAUGE GP-FEELER 1U7234 - Caterpillar

Caterpillar Products: AllIntroduction
This Special Instruction outlines the installation of various fuel/water separators. These fuel/water separators utilize the 175-7060 Base As , the 177-9778 Base As , or the 225-6404 Base As .Do not perform any procedure that is outlined in this publication until you understand the information that is contained in this document.Advantages of Fuel/Water Separators
Improved filtration of the fuel
Removal of water from the system
Increased life of the secondary filterInstallation of filter groups with 175-7060 Base As
Use the parts in Table 1 to install a fuel/water separator that utilizes this base.Installation of filter groups with 177-9778 Base As
Use the parts in Table 2 to install a fuel/water separator that utilizes this base.Installation of filter groups with 225-6404 Base As
Use the parts in Table 3 to install a fuel/water separator that utilizes this base.Necessary Parts for Installation
Table 1
Parts List for the Installation of Groups that use 175-7060 Base As    
Part Number     Description     Quantity    
207-2422 (1)     Water Separator and Fuel Filter Gp     1    
175-7060     Base As     1    
0S-1588     Bolt     2    
0T-0573     Bolt     1    
5M-2894     Hard Washer     4    
9S-8752     Full Nut     1    
( 1 ) 200-4139 Water Separator and Fuel Filter As is included in the 207-2422 Water Separator and Fuel Filter Gp .
Table 2
Parts List for the Installation of Groups that use 177-9778 Base As    
Part Number     Description     Quantity    
1R-0770 or 1R-0771     Water Separator and Fuel Filter As or Fuel Filter     1    
177-9778     Base As     1    
8T-4195     Bolt     4    
8T-4121     Hard Washer     4    
Table 3
Parts List for the Installation of Groups that use 225-6404 Base As    
Part Number     Description     Quantity    
200-4139     Water Separator and Fuel Filter As     2    
225-6404     Base As     2    
232-5991     Plate     1    
2A-4639     Bolt     8    
2K-8198     O-Ring Seal     4    
5M-2894     Hard Washer     22    
9S-8752     Full Nut     8    
3B-1915     Bolt     6    The suggested parts that are necessary for the installation of several groups of fuel/water separators are displayed in the previous tables. Actual parts may vary according to the mounting bracket and the location.
Table 4
Flow Rates for the Filter Assemblies    
Part Number     Flow Rate    
1R-0770     430 L (114 US gal)    
1R-0771    
590 L (157 US gal)    
200-4139    
1320 L (350 US gal)    The following procedure should be used in order to install the fuel/water separators on Caterpillar equipment. The procedures may be used with the single base arrangement or with the modular base arrangement.
Accidental machine starting can cause injury or death to personnel