GAUGE GP-ENGINE OIL TEMP 2752098 - Caterpillar

Illustration 2 g03109381
Table 2
Item     Qty     Part     Specification Description    
9     8     352-6061 Liner Seal     Assemble dry seals on clean and dry liner grooves.    
Before assembly, cover seals with either P-80 Rubber Lubricant Emulsion or liquid soap.
10     24     7N-2046 O-Ring Seal     Before assembly, cover seals with either P-80 Rubber Lubricant Emulsion or liquid soap.    
11     20     7X-7925 Bolt     Use the following procedure in order to tighten the crankshaft bearing cap bolts.
1. Before assembly, Lubricate the threads with clean engine oil.
2. Tighten the bolts by hand.
Tighten the bolts in the numerical sequence as shown in Illustration 2 to
190 14 N m (140 10 lb ft).
Again tighten the bolts to an additional angle of 180 5 degrees    
Illustration 3 g03109379
Right side view
Table 3
Item     Qty     Part     Specification Description    
G     3     7N-2047 Dowel     Extension of the dowel is
6.0 0.5 mm (0.24 0.02 inch).    
12     4     5F-9657 O-Ring Seal     Lubricate the bore lightly with sealant that is being sealed.    
H     2     4N-0683 Dowel     Extension of the dowel is
19.0 0.5 mm (0.75 0.02 inch).    
J     2     7N-2044 Dowel     Extension of the dowel is
40.0 0.5 mm (1.58 0.02 inch).