2G8516 GAUGE Caterpillar parts
16G
Rating:
Alternative (cross code) number:
CA2G8516
2G-8516
2G8516
CA2G8516
2G-8516
2G8516
Weight: 0.30 pounds 0 kg.
MOTOR GRADER,
Compatible equipment models: 2G8516:
Information:
Caterpillar Diesel Engines can operate effectively in cold weather. During cold weather, the starting and the operation of the diesel engine is dependent on the following items:
The type of fuel that is used
The viscosity of the engine oil
The operation of the glow plugs
Optional Cold starting aid
Battery conditionRefer to Special Publication, SEBU5898, "Cold Weather Recommendations for Caterpillar Machines".This section will cover the following information:
Potential problems that are caused by cold-weather operation
Suggest steps which can be taken in order to minimize starting problems and operating problems when the ambient air temperature is between “ 0° to −40 °C (32° to -40 °F)”.The operation and maintenance of an engine in freezing temperatures is complex . This complexity is because of the following conditions:
Weather conditions
Engine applicationsRecommendations from your Caterpillar dealer are based on past proven practices. The information that is contained in this section provides guidelines for cold-weather operation.Hints for Cold Weather Operation
If the engine will start, operate the engine until a minimum operating temperature of 80° C (176° F) is achieved. Achieving operating temperature will help prevent the intake valves and exhaust valves from sticking.
The cooling system and the lubrication system for the engine do not lose heat immediately upon shutdown. This means that an engine can be shut down for a period and the engine can still start readily.
Install the correct specification of engine lubricant before the beginning of cold weather.
Check all rubber parts (hoses, fan drive belts) weekly.
Check all electrical wiring and connections for any fraying or damaged insulation.
Keep all batteries fully charged and warm.
Fill the fuel tank at the end of each shift.
Drain the water from the fuel system. Refer to this Operation and Maintenance Manual, "Fuel System Primary Filter/Water Separator - Drain".
Check the air cleaners and the air intake daily. Check the air intake more often when you operate in snow.
Ensure that the glow plugs are in working order. Refer to Troubleshooting , "Glow Plug Starting Aid - Test".
Personal injury or property damage can result from alcohol or starting fluids.Alcohol or starting fluids are highly flammable and toxic and if improperly stored could result in injury or property damage.
Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury.
For jump starting with cables in cold weather, refer to the Operation and Maintenance Manual, "Starting with Jump Start Cables." for instructions.Viscosity of the Engine Lubrication Oil
Correct engine oil viscosity is essential. Oil viscosity affects the amount of torque that is needed to crank the engine. Refer to this Operation and Maintenance Manual, "Fluid Recommendations" for the recommended viscosity of oil.Recommendations for the Coolant
Provide cooling system protection for the lowest expected outside temperature. Refer to this Operation and Maintenance Manual, "Fluid Recommendations" for the recommended coolant mixture.In cold weather, check the coolant often for the correct glycol concentration in order to ensure adequate freeze protection.Engine Block Heaters
Engine block heaters (if equipped) heat the engine jacket water that surrounds the combustion chambers. This heat provides the following functions:
Startability is improved.
Warm
The type of fuel that is used
The viscosity of the engine oil
The operation of the glow plugs
Optional Cold starting aid
Battery conditionRefer to Special Publication, SEBU5898, "Cold Weather Recommendations for Caterpillar Machines".This section will cover the following information:
Potential problems that are caused by cold-weather operation
Suggest steps which can be taken in order to minimize starting problems and operating problems when the ambient air temperature is between “ 0° to −40 °C (32° to -40 °F)”.The operation and maintenance of an engine in freezing temperatures is complex . This complexity is because of the following conditions:
Weather conditions
Engine applicationsRecommendations from your Caterpillar dealer are based on past proven practices. The information that is contained in this section provides guidelines for cold-weather operation.Hints for Cold Weather Operation
If the engine will start, operate the engine until a minimum operating temperature of 80° C (176° F) is achieved. Achieving operating temperature will help prevent the intake valves and exhaust valves from sticking.
The cooling system and the lubrication system for the engine do not lose heat immediately upon shutdown. This means that an engine can be shut down for a period and the engine can still start readily.
Install the correct specification of engine lubricant before the beginning of cold weather.
Check all rubber parts (hoses, fan drive belts) weekly.
Check all electrical wiring and connections for any fraying or damaged insulation.
Keep all batteries fully charged and warm.
Fill the fuel tank at the end of each shift.
Drain the water from the fuel system. Refer to this Operation and Maintenance Manual, "Fuel System Primary Filter/Water Separator - Drain".
Check the air cleaners and the air intake daily. Check the air intake more often when you operate in snow.
Ensure that the glow plugs are in working order. Refer to Troubleshooting , "Glow Plug Starting Aid - Test".
Personal injury or property damage can result from alcohol or starting fluids.Alcohol or starting fluids are highly flammable and toxic and if improperly stored could result in injury or property damage.
Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury.
For jump starting with cables in cold weather, refer to the Operation and Maintenance Manual, "Starting with Jump Start Cables." for instructions.Viscosity of the Engine Lubrication Oil
Correct engine oil viscosity is essential. Oil viscosity affects the amount of torque that is needed to crank the engine. Refer to this Operation and Maintenance Manual, "Fluid Recommendations" for the recommended viscosity of oil.Recommendations for the Coolant
Provide cooling system protection for the lowest expected outside temperature. Refer to this Operation and Maintenance Manual, "Fluid Recommendations" for the recommended coolant mixture.In cold weather, check the coolant often for the correct glycol concentration in order to ensure adequate freeze protection.Engine Block Heaters
Engine block heaters (if equipped) heat the engine jacket water that surrounds the combustion chambers. This heat provides the following functions:
Startability is improved.
Warm
Caterpillar parts catalog:
Parts gauge Caterpillar catalog:
4N0748
GAUGE GP-OIL LEVEL (DIPSTICK)
16G, 3406, 3406B, 621B, 621E, 621F, 623E, 623F, 627E, 627F, 814B
16G, 3406, 3406B, 621B, 621E, 621F, 623E, 623F, 627E, 627F, 814B
6G6590
GAUGE GP
120G, 12G, 130G, 140G, 14G, 160G, 16G
120G, 12G, 130G, 140G, 14G, 160G, 16G
6G5315
GAUGE GP
120G, 12G, 130G, 140G, 14G, 160G, 16G
120G, 12G, 130G, 140G, 14G, 160G, 16G
8M7892
GAUGE AS-AMMETER
120, 120B, 120G, 12G, 130G, 140B, 140G, 1676, 16G, 215, 225, 235, 245, 3126, 3160, 3176B, 3208, 3304, 3304B, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412...
120, 120B, 120G, 12G, 130G, 140B, 140G, 1676, 16G, 215, 225, 235, 245, 3126, 3160, 3176B, 3208, 3304, 3304B, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412...
5T2985
GAUGE GP
120G, 12G, 130G, 140G, 14G, 16G
120G, 12G, 130G, 140G, 14G, 16G
4W0483
GAUGE GP-COOLANT TEMPERATURE
120G, 12G, 130G, 140G, 14G, 160G, 16G, 225, 231D, 235B, 235C, 235D, 30/30, 3114, 3116, 3126, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3512, 3516, 3516B, 3606...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 225, 231D, 235B, 235C, 235D, 30/30, 3114, 3116, 3126, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3512, 3516, 3516B, 3606...
1P0545
GAUGE GP-PRESSURE
120B, 120G, 120H, 120M, 12G, 12H, 12M, 130G, 135H, 140B, 140G, 140H, 140K, 140M, 143H, 14G, 14H, 14H NA, 160G, 160H, 160K, 160M, 163H, 16G, 16H, 16H NA, 16M, 432E, 613C, 631E, 633C, 637E, 666, 826C, 9...
120B, 120G, 120H, 120M, 12G, 12H, 12M, 130G, 135H, 140B, 140G, 140H, 140K, 140M, 143H, 14G, 14H, 14H NA, 160G, 160H, 160K, 160M, 163H, 16G, 16H, 16H NA, 16M, 432E, 613C, 631E, 633C, 637E, 666, 826C, 9...
6N7653
GAUGE AS-OIL LEVEL (DIPSTICK)
16G, 16H NA, 3406, 3406B, 3406C, 3406E, 3456, 621, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 814B, C15, C18, CX31-C18I, CX35-C18I, HT400
16G, 16H NA, 3406, 3406B, 3406C, 3406E, 3456, 621, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 814B, C15, C18, CX31-C18I, CX35-C18I, HT400
8H8581
GAUGE (Feeler)
120B, 120G, 120H, 120M, 12G, 12H, 12M, 130G, 135H, 140G, 140H, 140K, 140M, 143H, 14G, 14H, 14H NA, 160G, 160H, 160K, 160M, 163H, 16G, 16H, 16H NA, 16M, 235, 245, 613C, 631E, 633C, 637E, 666, 725, 730,...
120B, 120G, 120H, 120M, 12G, 12H, 12M, 130G, 135H, 140G, 140H, 140K, 140M, 143H, 14G, 14H, 14H NA, 160G, 160H, 160K, 160M, 163H, 16G, 16H, 16H NA, 16M, 235, 245, 613C, 631E, 633C, 637E, 666, 725, 730,...
1W3306
GAUGE GP-AIR PRESSURE
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 508, 611, 613C, 613C I...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 508, 611, 613C, 613C I...
3K0443
GAUGE
120G, 12G, 130G, 140G, 16G, 518, 528, 613, 613B, 621, 621B, 623, 627, 627B, 631C, 633D, 637, 637D, 641, 641B, 650B, 651, 657, 657B, 666, 666B, 769, 773, 814, 815, 816, 950, 966C, 980, 980B
120G, 12G, 130G, 140G, 16G, 518, 528, 613, 613B, 621, 621B, 623, 627, 627B, 631C, 633D, 637, 637D, 641, 641B, 650B, 651, 657, 657B, 666, 666B, 769, 773, 814, 815, 816, 950, 966C, 980, 980B
7N8515
GAUGE (air pressure)
120G, 140G, 16G, 518, 528, 613B, 621B, 627B, 633D, 637D, 641B, 657B, 815, 816, 920, 950, 966C
120G, 140G, 16G, 518, 528, 613B, 621B, 627B, 633D, 637D, 641B, 657B, 815, 816, 920, 950, 966C
2G8514
GAUGE
14G, 14H NA
14G, 14H NA
2G8512
GAUGE-OIL LEVEL (DIPSTICK)
12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
2S2970
GAUGE
D8H
D8H
1741577
GAUGE AS
140H, 143H, 14H, 160H, 163H, 16H
140H, 143H, 14H, 160H, 163H, 16H
1739331
GAUGE-DEPTH
SG16, SG18
SG16, SG18
1173302
GAUGE AS-DIPSTICK
120H, 120H NA, 12H NA, 135H, 140H, 140H NA, 160H
120H, 120H NA, 12H NA, 135H, 140H, 140H NA, 160H
1312079
GAUGE-OIL LEVEL
16H NA
16H NA
2172661
GAUGE-SIGHT
120H, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA
120H, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA