GAUGE AS-OIL LEVEL (DIPSTICK) 3156148 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3413 Pipe Sealant 1
Illustration 1 g00517353Note: Inspect the O-ring seals. Replace any O-ring seals that are worn or damaged.Note: During the installation of the O-ring seals, lubricate the O-ring seals with the fluid that is being sealed.
Install O-ring seal (17), nipple assembly (16), and dust cap (15). Note: The torque converter inlet relief valve has a plug and an O-ring seal instead of nipple assembly (16) and O-ring seal (17).
Install plug (18).
Apply Tooling (A) to plug (19).
Install plug (19).
Illustration 2 g00517352
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install poppet (11), spring (12), retainer (13), and retaining ring (14) in the spool.
Illustration 3 g00517349
Install spool assembly (10), shims (9), and spring (8).
Illustration 4 g00517344
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (7), cover (6), and bolts (5).
Illustration 5 g00517340
Install O-ring seal (4).
Illustration 6 g00517338
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install cover (2) and bolts (3) onto body (1). End By:
Install the torque converter inlet relief valve or the torque converter outlet relief valve. Refer to the Disassembly and Assembly, "Relief Valve (Torque Converter Inlet) - Remove and Install" and/or the Disassembly and Assembly, "Relief Valve (Torque Converter Outlet) - Remove and Install".