GAUGE-PISTON 3426241 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g00908098
Install seal (18) to gear motor (1) .
Install retaining ring (17) to gear motor (1) .
Install seal (16) to gear motor (1) .
Illustration 2 g00907935
Install seals (14) and (15) to plate (13).
Illustration 3 g00907934
Install plate (13) to gear motor (1) .
Illustration 4 g00907930
Install driven gear (12) and drive gear (11) to motor (1) .
Illustration 5 g00907929
Install plate (10) to gear motor (1) .
Illustration 6 g00907926
Install O-ring seal (9) to gear motor (8) .
Illustration 7 g00907924
Install body (8) to gear motor (1) .
Illustration 8 g00907335
Install seals (7) and (6) to gear motor (1) .
Install O-ring seal (5) to gear motor (1) .
Illustration 9 g00907333
Illustration 10 g00907332
Install cover (4) to gear motor (1) .
Install bolts (3) to gear motor (1) .
Illustration 11 g00912438
Install nut (2) to gear motor (1) .End By: Install the gear motor. Refer to Disassembly and Assembly, "Gear Pump (Hydraulic Fan) - Install".