GAUGE GP-OIL LEVEL (DIPSTICK) 3453679 - Caterpillar

Illustration 2 g02448364
The plate for Machine PIN (1) is located to the left of the case on the rear of the machine. The second plate for Machine PIN (1) is located on the left side of the radiator guard on the front of the machine.Machine PIN (1) ____________________CE Plate (2) ____________________Year of Manufacture (If required) (3) ____________________Country of Origin (4) ____________________The Engine Serial Number Plate is located on the left side of the engine block directly behind the dip stick tube.
Illustration 3 g02790071
Illustration 4 g01274351
Engine Serial Number ____________________The serial number plate for the ripper is located on the side of the ripper.
Illustration 5 g01256144
Illustration 6 g01057104
Ripper Serial Number ____________________The serial number plate for the winch is located on the side of the winch.
Illustration 7 g01256165
Illustration 8 g01323812
The winch serial number is located on the right vertical wall of the winch frame. Do not operate or service the winch unless your first read the Operation and Maintenance Manual with understanding the instructions for the safe operation of the winch.Winch Serial Number ____________________Model ____________________Certifications
ROPS/FOPS Plate
The message is positioned on the outside left canopy.
Illustration 9 g02448310
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without payload, should not exceed the mass on the certification plate.A typical example of the certification film is shown above.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information. Sound Certification
Illustration 10 g00933634
A typical example of this film is shown. Your machine may have a different value.If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "2000/14/EC".European Union
The machines are compliant to "2006/42/EC". The CE plate is positioned on the bottom left side of the Machine PIN (1) at the rear of the machine.
Illustration 11 g01883459
For quick reference, record this information in the spaces that are provided below.
Illustration 12 g02019094
Engine Power of primary engine (kW)____________________
Engine Power for additional engine (kW) (if equipped) ____________________
Typical operating weight of machine for European market (kg)____________________
Year of construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.