GAUGE AS-OIL LEVEL (DIPSTICK) 3453889 - Caterpillar

Each Caterpillar diesel engine is identified with a serial number plate and an information plate. These plate locations are listed in the following charts. For quick reference, record your equipment's serial numbers in the spaces provided. Engine Identification
Serial Number Plate (3400 Family)
Information Plate (3400 Family) Generator Identification
Locate these identification plates and copy the information in the space provided.
Generator Serial Number Plate (3400 Family)
Generator Serial Number Plate (3500 Family)Caterpillar attaches a Serial Number Plate to every generator. This plate is stamped with the generator model number, serial number, and the generator arrangement number.
Generator Data Plate (3400 Family)
Generator Data Plate (3500 Family)A generator Data Plate is attached to the generator below the stamped serial number. Control Panel Identification
Models 7C1000 (EMCP)The controls for your generator will be located in a control panel located on top of the generator or in the switchgear panel.
EMPC IIIf your generator has a top-mounted control panel, the model number is located on a nameplate inside the panel, either on the upper right hand corner of the front panel, or on the bottom of the panel housing.The control panel model number consists of letters and numbers that represent the options and ratings of the generator set and control panel. This model number code is defined in the control panel service manual.List the generator-mounted control panel model number in the space provided.
Generator Mounted Control Panel Model Number Engineering prints are shipped inside each control panel. Additional copies of prints can be found in the generator-mounted control panel service manual or can be ordered by contacting your Caterpillar dealer.The control panel parts book lists the parts available. Always consult your Caterpillar dealer for replacement parts, and the latest information on parts availability and updates.Floor-Standing Switchgear Identification
Caterpillar switchgear is identified with two nameplates.The first nameplate is attached to the outside upper door of the switchgear cubicle and consists of the Caterpillar Logo. The second nameplate is attached to the print pocket located inside the lower cubicle door and contains the following information. Enter the data from your nameplate in the blanks provided. Caterpillar floor-standing switchgear control panel Parts Book, SEBP1258, permits the user to identify needed service parts by the use of the Model Number, Numerical Code and Enercon Job Number from the second nameplate.Engineering prints are included with every piece of Caterpillar switchgear. These prints are found in the print pocket located inside the lower switchgear cubicle door. Additional copies of prints can be found in the switchgear Service Manual, SENR7970, or can be ordered by contacting your Caterpillar dealer.Parts Book, SEBP1258, lists all the parts available for standard Caterpillar switchgear. Always consult your Caterpillar dealer for replacement parts and the latest information on parts availability and updates.When making switchgear inquiries, always be sure to have all the information from this plate.When ordering replacement breakers with ratings over 1200 amps, always specify the manufacture's name.Transfer Switch Identification
If your Generator Set Power Module is equipped with a transfer switch, it will be identified with a nameplate on the door that