GAUGE AS-OIL LEVEL (DIPSTICK) 3536151 - Caterpillar

Illustration 1 g01050463
Note: Assemble this linkage on the machine by rotating the rod end of the saw cylinder and by positioning the grease fitting away from the stick. Coat all the bores for pins with lubricant prior to assembly.Note: Lubricate the sealing lip slightly with the lubricant that is being sealed. (1) 246-2363 Pin Diameter after plating ... 79.85 0.04 mm (3.144 0.002 inch) (2) 246-2364 Pin Diameter after plating ... 89.85 0.04 mm (3.537 0.002 inch) (3) Use the necessary shims to adjust the lateral clearance to a maximum of 1.6 mm (0.063 inch). 093-0083 Shim ... 1 mm (0.04 inch) 7Y-2498 Shim ... 1.6 mm (0.063 inch) 093-0115 ... 2 mm (0.08 inch) (4) Use the necessary shims to adjust the lateral clearance to a maximum of 1.6 mm (0.063 inch). 093-0084 Shim ... 1 mm (0.04 inch) 7Y-2497 Shim ... 1.6 mm (0.063 inch) 093-0116 Shim ... 2 mm (0.08 inch)