GAUGE AS-OIL LEVEL (DIPSTICK) 3579287 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the engine is equipped with fan guards, remove the fan guards.
Illustration 1 g01325726
Typical example
Loosen bolts (1), (2), and (4).
Push alternator (3) toward the engine and remove V-belt (5).Note: Mark the direction of rotation if the V-belt will be reused.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01325726
Typical example
Check the condition of the V-belt. If the V-belt is worn or damaged, use a new V-belt for replacement.
Install V-belt (5) in position on the engine.Note: A used V-belt should be installed in the original direction of rotation.
Slide alternator (3) away from the engine. Refer to Operation and Maintenance Manual for information on the correct belt tension. Tighten bolts (1), (2), and (4) to a torque of 25 N m (221 lb in).
If the engine is equipped with fan guards, install the fan guards.