3684129 GAUGE AS-OIL LEVEL (DIPSTICK) Caterpillar parts
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
Rating:
Alternative (cross code) number:
CA3684129
368-4129
3684129
CA3684129
368-4129
3684129
Weight: 0.30 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WIDIA Hanita 5AN313045C AluSurf 5AN3 HP Aluminum End Mill, 0.06" Radius, 0.5625" LOC, 0.5" Cutting Dia, Carbide, Uncoated, RH Cut, 3-Flute
WIDIA Center cutting || One tool for roughing and finishing operations || Slotting depths up to 1 x D and peripheral milling up to 1.5 x D axial at .5 x D radially || Unequal flute spacing for chatter-free performance (3-flute series only) || Multiple corner radii and extended neck configurations available as standard
WIDIA Center cutting || One tool for roughing and finishing operations || Slotting depths up to 1 x D and peripheral milling up to 1.5 x D axial at .5 x D radially || Unequal flute spacing for chatter-free performance (3-flute series only) || Multiple corner radii and extended neck configurations available as standard
$67.83
16 Jan 2024
0.4802[0.22] pounds
Amazon.com
WIDIA Hanita 5AN313045C AluSurf 5AN3 HP Aluminum End Mill, 0.06" Radius, 0.5625" LOC, 0.5" Cutting Dia, Carbide, Uncoated, RH Cut, 3-Flute
WIDIA Center cutting || One tool for roughing and finishing operations || Slotting depths up to 1 x D and peripheral milling up to 1.5 x D axial at .5 x D radially || Unequal flute spacing for chatter-free performance (3-flute series only) || Multiple corner radii and extended neck configurations available as standard
WIDIA Center cutting || One tool for roughing and finishing operations || Slotting depths up to 1 x D and peripheral milling up to 1.5 x D axial at .5 x D radially || Unequal flute spacing for chatter-free performance (3-flute series only) || Multiple corner radii and extended neck configurations available as standard
$65.65
22 Jun 2022
0.4802[0.22] Pounds
Amazon.com
WIDIA Hanita 5AN313045C AluSurf 5AN3 HP Aluminum End Mill, 0.06" Radius, 0.5625" LOC, 0.5" Cutting Dia, Carbide, Uncoated, RH Cut, 3-Flute
WIDIA Center cutting || One tool for roughing and finishing operations || Slotting depths up to 1 x D and peripheral milling up to 1.5 x D axial at .5 x D radially || Unequal flute spacing for chatter-free performance (3-flute series only) || Multiple corner radii and extended neck configurations available as standard
WIDIA Center cutting || One tool for roughing and finishing operations || Slotting depths up to 1 x D and peripheral milling up to 1.5 x D axial at .5 x D radially || Unequal flute spacing for chatter-free performance (3-flute series only) || Multiple corner radii and extended neck configurations available as standard
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 3684129:
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 6V-2166 Bearing Puller Gp 1 Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01142157
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (11) and relief valve cover (12). Remove spring (14) and pressure relief spool (15). Remove gasket (13) from the relief valve cover.
Remove bolts (1) and pump cover assembly (2). Remove gasket (3) from the pump cover assembly. If necessary, remove the dowels from pump cover assembly (2).
Remove bolts (10) and pump cover assembly (4) from oil pump body assembly (9).
Use Tooling (A) to remove sleeve bearings (5) from pump cover assembly (4). If necessary, remove the hollow dowels from pump cover assembly (4).
Remove idler shaft assemblies (6) and pump drive shaft assembly (7) from oil pump body assembly (9).
Use Tooling (A) or Tooling (B) to remove sleeve bearings (8) from oil pump body assembly (9).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 6V-2166 Bearing Puller Gp 1 Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01142157
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (11) and relief valve cover (12). Remove spring (14) and pressure relief spool (15). Remove gasket (13) from the relief valve cover.
Remove bolts (1) and pump cover assembly (2). Remove gasket (3) from the pump cover assembly. If necessary, remove the dowels from pump cover assembly (2).
Remove bolts (10) and pump cover assembly (4) from oil pump body assembly (9).
Use Tooling (A) to remove sleeve bearings (5) from pump cover assembly (4). If necessary, remove the hollow dowels from pump cover assembly (4).
Remove idler shaft assemblies (6) and pump drive shaft assembly (7) from oil pump body assembly (9).
Use Tooling (A) or Tooling (B) to remove sleeve bearings (8) from oil pump body assembly (9).
Caterpillar parts catalog:
Parts gauge Caterpillar catalog:
1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C ...
3450374
GAUGE GP-OIL LEVEL (DIPSTICK)
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 16M, 24H, 24M, 30/30, 3176B, 3176C, 3196, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 3406E, 3408B, 3412, 3412C, 3456, 345D, 345D L, 34...
1090, 1190, 1190T, 1290T, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 321B, 322 FM L, 322B...
3715166
GAUGE GP-OIL LEVEL (DIPSTICK)
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
3715166
GAUGE GP-OIL LEVEL (DIPSTICK)
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
2130949
GAUGE-OIL LEVEL
AD30, AD45, AD55
AD30, AD45, AD55
1994681
GAUGE-OIL LEVEL
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1994680
GAUGE-OIL LEVEL
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
5110B, 5230B
8T4379
GAUGE-TEMPERATURE
PR-1000, PR-450, PR-750B
PR-1000, PR-450, PR-750B
8T4418
GAUGE-TEMPERATURE
PR-1000, PR-450, PR-750B
PR-1000, PR-450, PR-750B
7C8020
GAUGE AS
CB-424
CB-424
7C2186
GAUGE AS-OIL LEVEL
AP-1200
AP-1200
3216052
GAUGE AS-OIL LEVEL (DIPSTICK)
AD55B, AD60
AD55B, AD60