GAUGE AS-OIL LEVEL 3746127 - Caterpillar

"-" Key
"-" Key (9) is used in order to zoom out the current view. When you zoom out, you see less detail on the screen. As you zoom out, more of the design and linework are shown. You can zoom out so far that the machine is barely visible on the screen. When you zoom out to this degree, the machine symbol is no longer drawn to scale. Keeping the machine symbol makes sure that you can always see the machine symbol in the current view.Holding down on the "-" Key allows the operator to zoom to the whole design. This feature is only available in the Plan View and Cross-Section View when a design is loaded.Display Brightness
The Display brightness can be adjusted by holding the "Menu" key and pressing the "+" Key or the "-" Key.Data Card Slot
Illustration 2 g01265965
The Display has a Data Card Slot (12) that allows the use of a CompactFlashTM Card. The Data Card Slot (12) allows the user to perform the following tasks:
Restore machine and display configuration data
Store machine and display configuration data
Load design data
Save design dataData Card and Data Storage
Construction designs are developed in the office and translated to a format that is easily read by the Display by using AccuGrade Office Software. The designs are then saved onto a Data Card in order to be read by the the AccuGrade System. The AccuGrade System interprets the designs above the blade cutting edge or below the blade cutting edge in order to provide guidance.When the door for the Data Card is opened, a red screen appears on the Display that prompts you not to remove the card. Do not remove the Data Card until the red screen is not present. If the Data Card is removed while the screen is red, the Data Card may be corrupted.In order to insert a Data Card, complete the following steps:
Press the tab that is located below the Data Card Slot (12) in order to open the flap. The slot is below the LCD on the Display. Refer to Illustration 2.
Insert a Data Card.
Lower the flap until the flap latches.You can use the AccuGrade Display to perform the following tasks on a Data Card:
retrieve files
save filesWorking with Dialogs
The "system setup", "alignment selection", "horizontal offset" selection, "vertical offset" selection, "design selection", and the "Setup Menu - Configuration" option screens are called dialogs. Use dialogs in order to enter data. Use the dialogs in order for the AccuGrade System to be set up according to your requirements. The selected field in a dialog is identified by the blue background color.Press the "Next" Key (5) on the display in order to move to different fields within the dialogs.Press the Arrow Keys (8) on the Display in order to enter data:The up arrow steps through the upper case letters "A through Z", the numbers "0 through 9", the decimal point ".", the negative sign "–", the positive sign "+", a space, and back to "A".Note: Available values will depend on