GAUGE ASSEM. (oil level) 3V8335 - Caterpillar

Illustration 10 g03749056Note: Do not use impact on the bolts for relays (28).
Install relays (28).
Illustration 11 g03749041Note: Do not use an impact on the bolts for the solenoid assembly (27).
Install solenoid assembly (27). Connect harness assembly (26).
Illustration 12 g03365521
Install plug (24) and plug (25) on manifold (22). Install O-ring seals (23) in cap (21).
Illustration 13 g03749019Note: Do not use an impact on bolts (19).
Install manifold (20). Install bolts (19). Install cap (17). Install bolts (18). Tighten bolts (18) to a torque of 6 1 N m (53 9 lb in).
Illustration 14 g03748965
Install bracket (16) on the tank. Install bolts (15).
Illustration 15 g03748916
Install pump assembly (14) and bolts (13).
Illustration 16 g03748899Note: Do not use an impact on bolt (12).
Install bolt (12). Tighten bolt (12) to a torque of 4 1 N m (35 9 lb in).
Illustration 17 g03748896
Install bolts (11).
Illustration 18 g03748859
Install the gasket (not shown), manifold (10), plate (9), and bolts (8). Tighten bolts (8) in an alternating sequence to a torque of 5 1 N m (44 9 lb in). Tighten bolts (8) a second time in an alternating sequence to a torque of 5 1 N m (44 9 lb in).
Illustration 19 g03748843
Connect harness assembly (7) and install cable straps (6).
Illustration 20 g03748803Note: Do not use an impact on the bolts for clips (1) and (5).
Install hoses (3). Apply Tooling (A) to the O-rings (not shown) inside hose assemblies (4). Connect hose assemblies (4). Connect harness assemblies (2). Install clips (1). Tighten the bolts for clips (1) to a torque of 6 1 N m (53 9 lb in). Install clips (5).
Illustration 21 g06041061
Illustration 22 g03749436
Install tank (47) in support assembly (49). Install straps (48). Install nuts (50). Tighten nuts (50) to a torque of 8 2 N m (71 18 lb in). Torque nuts (49) to a final torque of 11 1 N m (97 9 lb in).Note: Only apply torque once to nuts (50) when tightening straps (48). Apply torque to nuts (50) in the W, X, Y, Z sequence shown in Illustration 22.Note: Two types of straps are used to support different tank configurations. Only apply torque once to the nuts on both types of straps.
Illustration 23 g06041059
Install hose assembly (46).