GAUGE GP-OIL LEVEL (DIPSTICK) 4782411 - Caterpillar

Maintenance Recommendations
Caterpillar Inc. engines are certified by the United States Environmental Protection Agency (EPA) and the California Air Resources Board in order to comply with exhaust emission standards and gaseous emission standards that are prescribed by the law at the time of manufacture.Efficiency of the emission control and the engine performance depends on adherence to proper operation and maintenance recommendations and use of recommended fuels and lubricating oils. According to recommendations, major adjustments and repairs should be made by your authorized Cat dealer.Various chemical fuel additives which claim to reduce visible smoke are available commercially. Although additives have been used to solve some isolated smoke problems in the field, additives are not recommended for general use. The engines should be certified without smoke depressants according to federal smoke regulations.Take corrective steps immediately after worn parts which may affect the emissions level are discovered in order to ensure the proper operation of the emission control systems. The use of genuine Caterpillar components is recommended. If the owner uses non-Caterpillar components, then the non-Caterpillar components must not adversely affect the emissions level of the engine.For information on the use of Aftermarket Products and Caterpillar Engines, refer to this Operation and Maintenance Manual, "Engine Description".Regular maintenance intervals with a special emphasis on the following items are necessary in order to keep exhaust emissions within acceptable limits for the useful life of the engine. Refer to the Operation and Maintenance Manual, "Severe Service Application - Check" topic (Maintenance Section). If the engine is operating under severe conditions, adjust the maintenance schedule accordingly. See your authorized Cat dealer in order to help analyze your specific application, operating environment, and maintenance schedule adjustments.The following information is an explanation of maintenance items for emission-related components. See the Operation and Maintenance Manual, "Maintenance Interval Schedule" (Maintenance Section) for the specific interval for the following items.ENGINE AFTERTREATMENT SYSTEM - The Engine Aftertreatment Systems are sensitive to the type of fuel and lubricants that is used. Also, the engine aftertreatment systems are sensitive to the operating schedule. Low quality fuel, lubricants, or fluids may cause increases in exhaust back pressure or clogging resulting in loss of power. An authorized Cat dealer can determine if the engine aftertreatment systems require a service.NOx Reduction System (NRS) - The NRS is monitored. An authorized Cat dealer can determine if the NRS needs service.FUEL INJECTORS - Fuel injector tips are subject to wear as a result of fuel contamination. This damage can cause the following conditions: an increase in fuel consumption, black smoke, misfire and rough running engine. The fuel injector should be inspected, tested, and replaced, if necessary. Fuel injectors can be tested by an authorized Cat dealer.TURBOCHARGER - Refer to this Operation and Maintenance Manual, "Turbocharger - Inspect" for information on inspection of the turbocharger.ELECTRONIC ENGINE CONTROL (ECM) - The ECM is the control computer of the engine. The ECM provides power to the electronics. The ECM monitors data that is input from the sensors of the engine. The ECM