GAUGE-FUEL 4786562 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03859680
Typical example
Disconnect harness assembly (3) for inlet manifold temperature sensor (1) from harness assembly (4).
Remove inlet manifold temperature sensor (1) from manifold (2).
Remove sealing washer (5) from inlet manifold temperature sensor (1). Installation Procedure
Ensure that all components are clean and free from damage. Replace any components that are worn or damaged.
Illustration 2 g03859680
Typical example
Install new sealing washer (5) to inlet manifold temperature sensor (1).
Install inlet manifold temperature sensor (1) to manifold (2). Tighten the inlet manifold temperature sensor to a torque of 20 N m (177 lb in).
Connect harness assembly (3) for inlet manifold temperature sensor (1) to harness assembly (4).