GAUGE AS-OIL LEVEL (DIPSTICK) 4873416 - Caterpillar

Illustration 1 g00844382
(1) Torque for locknut ... 11000 550 N m (8113 406 lb ft)Lubricate the face and the thread of the locknut with 8T-9580 Hydraulic Oil before assembly. (2) Lubricate the inside diameter and outside diameter of the seals and the ring with clean grease. (3) Rod assembly Diameter of rod ... 104.93 0.030 mm (4.131 0.0012 inch) Plating thickness ... 0.033 0.007 mm (0.0013 0.0003 inch) (4) Bore of cylinder ... 150 0.10 mm (5.9055 0.0039 inch) (5) Bore of head ... 105.73 0.030 mm (4.163 0.0012 inch)Note: Make sure that the bearings are installed in the bore so that the identification numbers of the bearings are facing outward. (6) Lubricate the sealing lip slightly with the lubricant that is being sealed. (7) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly.