GAUGE AS-OIL LEVEL 4898133 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-5845 Bolt 2
8T-3282 Hard Washer 2
Raise the machine to Service Height. Refer to Operation & Maintenance Manual, "Operator Controls" , All Leg Raise/Lower and Auto Leveling. Install the rear service leg locks. Use suitable cribbing to support the front of the machine.
Raise the moldboard. Refer to Operation & Maintenance Manual, "Operator Controls" , Moldboard Raise/Hold and Lower/Float.
Illustration 1 g06111065
With the moldboard raised, install Tooling (A) as shown. Repeat process for opposite side of the moldboard.
Illustration 2 g06119047
Remove three bolts (1). Remove moldboard cutting edge (2). Repeat process for remaining moldboard cutting edges.Installation Procedure
Install moldboard cutting edge (2) in the reverse order of removal.