GAUGE ASSEM. 4N0664 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Centrifugal Oil Filter - Inspect
Cooling System Coolant Sample (Level 2) - Obtain
Engine Air Cleaner Element - Replace
Engine Crankcase Breather - Clean
Engine Oil - Change
Engine Oil Filter - Change
Fuel - Changeover
Fuel Analysis - Obtain
Fuel System Primary Filter (Water Separator) Element - Replace
Metal Particle Detector - Inspect
Zinc Rods - Inspect/Replace
Every Service Hour
Trend Data - Record
Daily
Air Starting Motor Lubricator Oil Level - Check
Air Tank Moisture and Sediment - Drain
Cooling System Coolant Level - Check
Driven Equipment - Inspect/Replace/Lubricate
Engine Air Precleaner - Clean
Engine Oil Centrifuge - Check
Engine Oil Level - Check
Fuel Oil Conditioning Module - Check
Fuel Oil Separator - Check
Fuel System Fuel Injector Tip Cooling Module - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Governor Actuator Oil Level - Check
Instrument Panel - Inspect
Walk-Around Inspection
Every Week
Fuel Oil Conditioning Module - Check
Every 50 Service Hours or Weekly
Zinc Rods - Inspect/Replace
Every 100 Service Hours or 2 Weeks
Turbocharger - Water Wash
Every 200 Service Hours or 1 Year
Aftercooler Condensation - Drain
Every 250 Service Hours
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Every 250 Service Hours or Monthly
Cooling System Coolant Sample (Level 1) - Obtain
Every 250 Service Hours or 6 Weeks
Air Shutoff - Test
Air Starting Motor Lines Screen - Clean
Engine Oil Sample - Obtain
Governor Actuator Linkage - Check
Oil Mist Detector - Check
Every 500 Service Hours or 3 Months
Engine Mounts - Inspect
Engine Protective Devices - Check
Oil Mist Detector - Clean/Replace
Initial 1000 Service Hours or 6 Months
Engine Timing, Synchronization, and Valve Lash - Inspect/Adjust
Engine Valve Rotators - Inspect
Every 1000 Service Hours
Fuel Oil Conditioning Module - Check
Every 1000 Service Hours or 6 Months
Barring Device - Lubricate
Cooling System Coolant Sample (Level 2) - Obtain
Engine Mounts - Check
Engine Oil Filter - Change
Exhaust Piping - Inspect
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace