GAUGE GP-OIL LEVEL (DIPSTICK) 4N6059 - Caterpillar

Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Disconnect batteries before performance of any service work.
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Illustration 1 g01181829
Open access panel (1) and open hood (2) .
Illustration 2 g01181833
Illustration 3 g01181849
Disconnect harness assembly (3) and remove bolt (5). Remove belt (6), guard (7), nut (9), and bolt (4) from alternator (8). Remove alternator (8) from the machine.Installation Procedure
Illustration 4 g01181849
Illustration 5 g01181833
Position alternator (8) onto the machine. Install bolt (4). Install nut (9), guard (7), belt (6), and bolt (5). Connect harness assembly (3) .
Illustration 6 g01181829
Close hood (2) and access panel (1) .