GAUGE-OIL LEVEL (DIPSTICK) 4P2613 - Caterpillar

Connect hose assembly (11) that was disconnected in Step 7 using one 4J-0524 O-Ring Seal (29), four 8T-4183 Bolts (33), and four 8T-4223 Hard Washers (20). Refer to Illustration 10.
Connect hose assembly (6) that was disconnected in Step 4 using one 5K-9090 O-Ring Seal (28). Refer to Illustration 10.
Install 4J-0524 O-Ring Seal (29), 229-5610 Manifold (30), 9S-8005 O-Ring Plug (31), and 3K-0360 O-Ring Seal (32). Refer to Illustration 10.
Connect hose assembly (9) that was disconnected in Step 7 using one 4J-0524 O-Ring Seal (29), four 6V-8336 Bolts (19), and four 8T-4223 Hard Washers (20). Refer to Illustration 10.
Install 433-7184 Hose As (34) using two 4J-0524 O-Ring Seals (29), four 8T-4183 Bolts (33), four 8T-4223 Hard Washers (20), and the bolts and flanges retained in Step 8. Refer to Illustration 10.
Install 433-7875 Hose As (35) using two 4J-0524 O-Ring Seals (29), four 8T-4183 Bolts (33), four 8T-4223 Hard Washers (20), and the bolts and flanges retained in Step 8. Refer to Illustration 10.
Install 435-6414 Hose As (36) using two 4J-0524 O-Ring Seals (29), four 8T-4183 Bolts (33), four 8T-4223 Hard Washers (20) and the bolts and flanges retained in Step 6. Refer to Illustration 10.
Illustration 11 g03356443
Install clamp (3), clamp (4), and clamp (5) that were retained in Step 3 into position (37), (38), and (39) respectively. Refer to Illustration 2 and Illustration 11.
Illustration 12 g03382245
(24) 418-7107 Valve As (32) 3K-0360 O-Ring Seal (40) 118-4728 Elbow (41) 442-1395 Bracket As (42) 6D-4244 Clip (43) 8T-4136 Bolt (44) 8T-4121 Hard Washer
Install 3K-0360 O-Ring Seal (32) and 118-4728 Elbow (40) .
Illustration 13 g03382249
(24) 418-7107 Valve As (40) 118-4728 Elbow (41) 442-1395 Bracket As (42) 6D-4244 Clip (43) 8T-4136 Bolt (44) 8T-4121 Hard Washer (45) 443-2189 Bracket As (46) Plug (47) 4K-6297 Elbow (48) 3J-1907 O-Ring Seal (49) Secondary steering pump
Remove and discard plug (46) from secondary steering pump (49). Refer to Illustration 13.
Install 4K-6297 Elbow (47) and 3J-1907 O-Ring Seal (48). Refer to Illustration 13.
Connect the 291-5222 Hose As from 118-4728 Elbow (40) to 4K-6297 Elbow (47). Refer to Illustration 12 and Illustration 13.
Secure the 291-5222 Hose As using Item (41) through Item (45). Refer to Illustration 12 and Illustration 13.
Illustration 14 g03355982
Connect hose assembly (1) to transmission oil filter assembly (2) .
Install the upper drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Upper) - Remove and Install".
Check the oil level in the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper filling procedure.