GAUGE AS-TEMPERATURE 4W0511 - Caterpillar

The EMCP II+ consists of the following components: Generator Set Control+ (GSC+), Instrument Panel, Alarm Module and Synchronizing Light Module.
Illustration 1 g00770843
EMCP II+ (1) Generator set control+ (GSC+) (2) Upper display (3) Lower display (4) Speed potentiometer (5) Engine control switch (ECS) (6) Starting aid switch (7) Alarm module (ALM) (8) Alarm module (ALM) or Synchronizing light module (SLM) (9) Fault indicators (10) Fault alarm indicator (11) Keypad (12) Voltage adjust rheostat (13) Emergency stop push button (ESPB) (14) Panel lights (15) Alarm indicatorGenerator Set Control+ (GSC+)
The main component of the EMCP II+ system is the generator set control+ (GSC+) (1). The GSC+ is designed to operate when the GSC+ is powered by 24 VDC or 32 VDC. The GSC+ monitors the generator set. The GSC+ controls many of the functions of the generator set. The GSC+ has four main components: fault indicators, upper display, lower display and keypad.Fault Indicators
The ten fault indicators (9) are used in order to show a fault that is present. The ten fault indicators are also used to describe a fault that is present. The fault indicators are divided into four groups. The four groups are the fault alarm indicator (10), the spare fault indicators, the fault shutdown indicator and the dedicated shutdown indicators.Upper Display
The primary function of the upper display (2) is showing the following information of the generator output: AC voltage, current and frequency. Several options are available on the upper display for AC metering. These options can be viewed one at a time by pressing the AC Meter key on the keypad.Lower Display
The lower display (3) shows values for power metering, engine parameters and the relay status. The left side of the lower display serves as a power meter for the generator set.Keypad
The keypad (11) is used to control the information that is shown on upper display (2) and lower display (3). The seven keys have two sets of functions, normal functions and service functions. See the topic Systems Operation, RENR1200, "Service Mode" for a description of the service functions of the keys. The normal functions of the keys are described in the following paragraphs.Power Meter Key - This key controls the viewing of power meter information. This information is shown on the lower display. Pressing the key for at least five seconds causes all the power meter data to scroll once. The default power meter data then resumes scrolling. Briefly pressing this key for less than five seconds will stop the scrolling of the power meter functions, until the key is pressed again. AC Meter Key - The AC meter key controls the viewing of the AC parameters on the upper display. Pressing the key causes the display to show a different set of parameters.Engine Meter Key - This key controls the viewing of engine parameters on the lower display. Pressing the key stops the scrolling of engine conditions. The value for one particular engine condition will show continuously. The pointer flashes indicating that the scrolling is stopped. The scrolling