GAUGE (Oil Pressure) 5M1085 - Caterpillar

Home Button (4) - This button navigates to the Home Screen.
Grade Control Menu Button (5) - Press this button to navigate to the Grade Control menu.
Cycle Button (6) - Press this button to cycle through different Advanced Recall Screen options.
Back Button - This button returns or cancels the last operation.
OK Button - This button acknowledges the selection.
Arrow Buttons - These four buttons are used for the following purposes: navigation button, data information, and increasing or decreasing a setting value. The arrow buttons (up/down) switch the page from one screen to another screen.
Help Button - Pressing this button leads the user to additional screens to assist the user with supplemental information.
Match Slope Button - Press this button to modify the highlighted Recall Value to the corresponding Actual Slope Value. This action sets the Blade Slope Recall Value to match the Actual Blade Slope Value.
Swap Blade Slope Button - Press this button to swap Blade Slope values.
Swap Mainfall Slope Button - Press this button to swap Mainfall Slope values.
Automatic Mode (11) - The system assists the operator in maintaining the blade slopes.Operation Information
Low Idle (6) - Rotate the engine throttle counterclockwise to lower the idle speed.
High Idle (7) - Rotate the engine throttle clockwise to increase the idle speed. For high idle, rotate the engine throttle to highest position . The engine speed immediately moves to 1800 rpm high idle. When operating in the speed ranges, the speed increases with the load to a maximum of 2200 rpm .Battery Disconnect Switch
Disconnect Switch On - Insert key (4), and turn the key clockwise to activate the electrical system. The switch must be ON before you start the engine.
Disconnect Switch Off - Turn key (4) counterclockwise to shut off the entire electrical system.Stopping the Engine
DELAYED ENGINE SHUTDOWN OVERRIDE - Turn the engine key switch to the DELAYED ENGINE SHUTDOWN OVERRIDE position and hold the engine key switch in that position for 1 second to override delayed engine shutdown (DES). The engine will be shut down immediately.Window Washer Reservoir - Fill
Window Washer - The washer fluid bottle is on the left side of the machine. Open the access door. Remove the fluid bottle cap to fill the washer fluid bottle.