GAUGE G-SEAL 6V7060 - Caterpillar

Illustration 1 g00882053Use route (1) as the primary route for leaving the machine. Use route (2) as an alternate route.
Use the steps and the handholds when you get off the machine. Make sure that the steps are clear of debris before you dismount.
Illustration 2 g00037860
Face the machine and maintain a three-point contact with the steps and with the handholds. Note: Three-point contact can be two feet and one hand. Three-point contact can also be one foot and two hands.
Inspect the engine compartment for debris. Clean out any debris and paper in order to avoid a fire.
Remove all flammable debris from the front bottom guard in order to reduce the fire hazard. Dispose of the debris properly.
Turn the battery disconnect switch to the OFF position. Remove the disconnect key, and secure the lock on the cover plate. This will help to prevent a battery short circuit. Removing the key will also help to protect the battery from vandalism and from any possible current draw by components over extended time periods.
Install all the covers and install all the vandalism protection locks.