GAUGE AS 7T2023 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01023396
Disconnect the harness assembly from variable valve actuator oil pressure sensor (1) .
Remove the variable valve actuator oil pressure sensor from the valve mechanism cover base. Remove the O-ring seal from the variable valve actuator oil pressure sensor.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01023396
Install a new O-ring seal on the variable valve actuator oil pressure sensor. Install variable valve actuator oil pressure sensor (1). Tighten the variable valve actuator oil pressure sensor to a torque of 20 2 N m (177 18 lb in).
Connect the harness assembly to the variable valve actuator oil pressure sensor.