GAUGE (Engine Oil Pressure) 8D1262 - Caterpillar

Removal Procedure
Start By:
Remove the throttle control valve. Refer to Disassembly and Assembly, "Throttle Control Valve - Remove".
Illustration 1 g00994601
Remove tube assembly (1) and tube assembly (2).
Illustration 2 g00994602
Disconnect harness assembly (3) from fuel control valve (4).
Illustration 3 g00994603
Illustration 4 g00994604
Attach a suitable lifting device to fuel control valve (4).
Remove bolts (5).
Remove fuel control valve (4) and plate (7). The weight of the fuel control valve and the plate is approximately 82 kg (180 lb).
Position fuel control valve (4) on blocking.
Reposition the suitable lifting device.
Remove bolts (6).
Remove fuel control valve (4) from plate (7). The weight of the fuel control valve is approximately 45 kg (100 lb). Installation Procedure
Illustration 5 g00994604
Illustration 6 g00994603
Attach a suitable lifting device to fuel control valve (4).
Position fuel control valve (4) onto plate (7). The weight of the fuel control valve is approximately 45 kg (100 lb).
Install bolts (6).
Attach a suitable lifting device to fuel control valve (4).
Position fuel control valve (4) and plate (7). The weight of the fuel control valve and the plate is approximately 82 kg (180 lb).
Install bolts (5).
Illustration 7 g00994602
Connect harness assembly (3) to fuel control valve (4).
Illustration 8 g00994601
Install tube assembly (1) and tube assembly (2). End By:
Install the throttle control valve. Refer to Disassembly and Assembly, "Throttle Control Valve - Install".