8N2927 GAUGE AS-OIL LEVEL (DIPSTICK) Caterpillar parts
3412, 3412D
Rating:
Alternative (cross code) number:
CA8N2927
8N-2927
8N2927
CA8N2927
8N-2927
8N2927
Weight: 0.010 pounds 0 kg.
INDUSTRIAL ENGINE, MARINE ENGINE,
Number on catalog scheme:
1
For full view, you need register
Information:
Introduction
The following information describes the procedure for Removing and Replacing the Position Sensor (Lift Linkage).Test Preparation
Reference: For additional information about preparing the machine for troubleshooting the machine, refer to the Service Manual module Troubleshooting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Test Procedure
Tilt the bucket to a position level with the ground. Lower the bucket to the ground.
Connect the steering frame lock link.
Engage the parking brake.
Stop the engine and leave the key start switch in the OFF position.
Illustration 1 g03671975
Right Side of Front Frame
(51) Lift Linkage Position Sensor
Disconnect the harness connector from the sensor connector.
Remove the bracket from the frame.
Remove the fork from the Lift Linkage Position Sensor.
Remove the Lift Linkage Position Sensor from the bracket.
Install the new Lift Linkage Position Sensor on the bracket.
Install the fork on the new Lift Linkage Position Sensor.
Install the bracket on the frame.
Connect the harness connector to the sensor connector.
The Lift Linkage Position Sensor must be calibrated before the machine is returned to use. Adjustment Procedure
Reference: For the correct procedure in order to calibrate the Tilt Linkage Position Sensor, refer to Testing and Adjusting, UENR3849, "Calibrations (Cat ET)" for the correct calibration procedure.
The following information describes the procedure for Removing and Replacing the Position Sensor (Lift Linkage).Test Preparation
Reference: For additional information about preparing the machine for troubleshooting the machine, refer to the Service Manual module Troubleshooting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Test Procedure
Tilt the bucket to a position level with the ground. Lower the bucket to the ground.
Connect the steering frame lock link.
Engage the parking brake.
Stop the engine and leave the key start switch in the OFF position.
Illustration 1 g03671975
Right Side of Front Frame
(51) Lift Linkage Position Sensor
Disconnect the harness connector from the sensor connector.
Remove the bracket from the frame.
Remove the fork from the Lift Linkage Position Sensor.
Remove the Lift Linkage Position Sensor from the bracket.
Install the new Lift Linkage Position Sensor on the bracket.
Install the fork on the new Lift Linkage Position Sensor.
Install the bracket on the frame.
Connect the harness connector to the sensor connector.
The Lift Linkage Position Sensor must be calibrated before the machine is returned to use. Adjustment Procedure
Reference: For the correct procedure in order to calibrate the Tilt Linkage Position Sensor, refer to Testing and Adjusting, UENR3849, "Calibrations (Cat ET)" for the correct calibration procedure.
Caterpillar parts catalog:
Parts gauge Caterpillar catalog:
3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3512, 3516, C-15, D398A, G3304, G3306, G3408, G3408B, G3412, G342C, PR-1000, SR4
120, 120B, 120G, 12G, 130G, 140B, 140G, 1676, 16G, 215, 225, 235, 245, 3126, 3160, 3176B, 3208, 3304, 3304B, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412...
3126, 3126B, 3176C, 3196, 3406B, 3406C, 3406E, 3408E, 3412, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, C-10, C-12, C-15, C-16, C-9, C11, C12, C13, C15, C18, C27, C30, C32, C7, C9, C9....
3126, 3126B, 3176C, 3196, 3406B, 3406C, 3406E, 3408, 3408E, 3412, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, C-10, C-12, C-15, C-16, C-9, C11, C12, C13, C15, C18, C27, C30, C32, C7, C...
3304, 3304B, 3306, 3306B, 3412, G3406
3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3512, 3516, C-15, D398A, G3304, G342C
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 16M, 24H, 24M, 30/30, 3176B, 3176C, 3196, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 3406E, 3408B, 3412, 3412C, 3456, 345D, 345D L, 34...
3406B, 3408, 3408B, 3412, 3412D, 3412E, 3508, 3512, 3516, 3606, 3608, 3612, 3616, C30, C32, D398A
3406B, 3408, 3408B, 3412, 3412D, 3412E, 3508, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, C30, C32, D379B, D398A
3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, 3612, 3616, C-15, C-16, C15, C18, C27, C280-12, C280-16, C280-...
3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, D379B, D398A, G3508, G3512, G3516
3126, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3412D, 3412E, C11, C13, C18, CX31-C13I, HT400, TH35-C11I, TH35-C13I
9S5578
GAUGE-OIL PRESSURE
225, 3160, 3406, 3406B, 3408, 3412, 3412C, 613, 613B, 641B, 650B, 657B, 666B
225, 3160, 3406, 3406B, 3408, 3412, 3412C, 613, 613B, 641B, 650B, 657B, 666B
2N2414
GAUGE-OIL PRESSURE
3304, 3306, 3406, 3408, 3412, D342, D343, D348, D349, D353C
3304, 3306, 3406, 3408, 3412, D342, D343, D348, D349, D353C
6R8932
GAUGE AS
RT100
RT100
1316583
GAUGE AS-OIL LEVEL (DIPSTICK)
416, 426, AP-800
416, 426, AP-800
3176, 3176B, 75
0365803
GAUGE AS
436, CS-431B
436, CS-431B
5L9416
GAUGE-WATER TEMPERATURE
3304, 3306, 3406, 3406B, 3408, 3412, 3412D, D346
3304, 3306, 3406, 3406B, 3408, 3412, 3412D, D346
3208, 3306, 3406, 3408, 3412, D342C, D348
3208, 3306, 3406, 3412, D342C, D348
3406B, 3408, 3408B, 3412, 3412D, 3412E, 3508, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, C30, C32, D379B, D398A
3406B, 3408, 3408B, 3412, 3412D, 3412E, 3508, 3512, 3516, 3606, 3608, 3612, 3616, C30, C32, D398A
8N1175
GAUGE AS-OIL LEVEL (DIPSTICK)
3412, 3412D
3412, 3412D