GAUGE 8T0535 - Caterpillar

TARGET="_parent">Air Tank Moisture and Sediment - Drain
Backup Alarm - Test
Cooling System Coolant Level - Check
Engine Air Filter Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Neutral Start Switch - Test
Seat Belt - Inspect
Water Tank Strainer - Clean and Inspect
Every 50 Service Hours or Weekly
Air Compressor Air Filter - Clean/Inspect
Air Compressor Oil - Check
Tire Inflation - Check
Initial 250 Service Hours
Hydraulic System Oil - Change
Hydraulic System Oil Filter - Replace
Strainer (Flushing System) - Clean
Every 250 Service Hours
Toggle Switch - Inspect
Every 250 Service Hours or Monthly
Air Compressor Oil - Change
Belts - Inspect/Adjust/Replace
Oscillating and Steering Bar - Lubricate
Every 250 Service Hours or 3 Months
Engine Oil Sample - Obtain
Fuel Tank Cap and Strainer - Clean
Operator Platform - Lubricate
Steering Cylinder Ends - Lubricate
Wheel Bearings (Front) - Lubricate
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Hydraulic System Oil Sample - Obtain
Strainer (Flushing System) - Clean
Every 500 Service Hours or 6 Months
Air Compressor Air Filter - Replace
Braking System - Test
Drive Shaft - Lubricate
Engine Oil and Filter - Change
Fuel System Water Separator Element - Replace
Every 1000 Service Hours or 1 Year
Battery - Clean/Check
Cooling System Pressure Cap - Clean/Replace
Engine Mounts - Inspect
Engine Valve Lash - Check
Hydraulic System Oil Filter - Replace
Hydraulic System Tank Vent - Replace
Hydraulic Tank Strainer - Clean
Rollover Protective Structure (ROPS) - Inspect
Every 2000 Service Hours or 1 Year
Crankshaft Vibration Damper - Inspect
Hydraulic System Oil - Change
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Replace
Engine Water Pump - Inspect
Every 3 Years
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
First 3750 L (1000 US gal) of Fuel or 250 Service Hours
Fuel Injection Timing - Check
PM Level 2 - Every 30 000 L (8000 US gal) of Fuel or 2000 Service Hours or 1 Year
Fuel Injection Timing - Check