GEAR 0010328 - Caterpillar

Illustration 1 g01282735
Rear view
(1) If necessary, apply 165-2601 Silicone Sealant to the flywheel housing.
Illustration 2 g01282736
Front view
Bolts (M16) (2) Tighten the top two bolts to the following torque. ... 190 29 N m (140 21 lb ft)Bolts (M12) (4) Tighten the bottom two bolts to the following torque. ... 115 17 N m (85 13 lb ft)Bolts (M10) (3) Tighten the four bolts to the following torque. ... 63 10 N m (46 7 lb ft)
Illustration 3 g01370187
Typical example
(5) Tighten the top two bolts to the following torque. ... 78 N m (58 lb ft) (6) Tighten the setscrew to the following torque. ... 63 N m (46 lb ft) (7) If necessary, apply 165-2601 Silicone Sealant to the flywheel housing.