GEAR 2 0936520 - Caterpillar

Image1.18.1
Proper Installation of Bracket and Clip (Image1.18.1)
Image1.19.1
Note: Opening in grommet must line up between gap in 8T-1889 and 8T-1890 Clips. (Image1.19.1)
Image1.20.1
Illustration of correct left front hose routing. (Image1.20.1)
Once installation of the hose is complete, review the work to be sure that the entire routing is correct with the hose touching only the rubber grommets in the p-clips. Adjust if required.
Turn the fuel supply valve back on and prime the fuel system while assistant checks the hose connections for leaks.
Rework of Remote Air-to-Air Aftercooler Motor Lines
The replacement of the Remote Air-to-Air Aftercooler motor lines does not need performed if the Remote Air-to-Air Aftercooler has been previously updated to the Air-to-Air aftercooler mounted behind the radiator.
Use caution to ensure that dirt does not get into the hydraulic system.
Remove cab floor plate.
Remove engine enclosure sheet metal as required.
Drain hydraulic system or place a vacuum on the hydraulic tank.
Image1.22.1
Image1.22.2
Remove motor supply hose assembly by disconnecting at the control valve block (36) and fan motor (39) and by removing