GEAR 0965903 - Caterpillar

Illustration 1 g01133180
Inspection points for the service inspection (A) Ground level controls (B) Front lights (C) Cooling system (D) Engine (E) Air cleaner (F) Hydraulic system (G) Front suspension cylinders (H) Fuel tanks (I) Power train hydraulic system (J) Steering hydraulic system (K) Articulating hitch and oscillating hitch (L) Rear axle (M) Frame and body (N) Automatic lubrication system (if equipped) (O) Tires (P) Roll over Protective Structure
Illustration 2 g01134983
(A) Inspect the ground level controls for proper operation. Replace a damaged or worn engine shutdown switch (1). Replace a damaged or worn battery disconnect switch (2). (B) Inspect the lights for broken lamps, lenses, and proper operation. Replace broken lamps and lenses. (C) Inspect the cooling system for leaks, worn hoses, and debris. Repair any leaks and damaged hoses. Remove any debris that could block the air flow through the radiator.
Illustration 3 g01134984
(D) Inspect the engine. Use dipstick (3) to check the engine oil level. Check for oil leaks, coolant leaks, and exhaust leaks. Check the belts of the engine for proper tension and for good condition.
Illustration 4 g01135832
(E) Check engine air precleaner (5) for accumulated debris. If necessary, clean engine air precleaner (5). For the correct procedure, refer to Operation and Maintenance Manual, "Engine Air Precleaner - Clean" for the machine that is being serviced. (F) Inspect the hydraulic system. Check for leaks, worn hoses, and damaged lines. Repair any leaks, worn hoses, and damaged lines.Check the level in hydraulic tank (4). Make sure that the filler cap is installed. Inspect the tank covers for damaged bolts, loose bolts, or missing bolts. Tighten loose bolts and replace missing bolts. Check the welds and mounting brackets for the hydraulic tank. Inspect the tank for leaks or for damage. If necessary, make repairs. (G) Inspect the front suspension cylinders and hoist cylinders for leaks or damage. Repair any leaks in the suspension cylinders. Check for the following conditions. If any of these conditions are present, for further instructions refer to Operation and Maintenance Manual, "Suspension Cylinder - Check" for the machine that is being serviced.
The chrome has been wiped off and the whole length of the chrome is used during normal operation.
The ride is harsh and the suspension cylinders extend fully when the machine is empty. (H) Inspect the fuel tanks. Make sure that the filler caps are installed correctly. Check the welds and mounting brackets for the fuel tanks. Look for any leaks or damage to the fuel tanks.
Illustration 5 g01041177
(I) Inspect the hydraulic system for the torque converter and transmission (6). Check for leaks from the torque converter and from the transmission. Check for worn hoses and for damaged lines. Repair any leaks, worn hoses, and damaged lines.
Illustration 6 g01012249
(J) Inspect the steering hydraulic system for leaks, worn hoses, and damaged lines. If necessary repair leaks, worn hoses and damaged lines. Inspect the steering cylinders (7). (K) Inspect the articulating hitch and the oscillating hitch for wear, damage, and loose or missing bolts. Have the necessary repairs made. (L) Inspect the rear axle