1107167 GEAR & BEARING GP Caterpillar parts
322, 322 FM L, 322 LN, 322B L, 322B LN
Rating:
Alternative (cross code) number:
CA1107167
110-7167
1107167
CA1107167
110-7167
1107167
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
Table 3
Coolant Temperature Sensor Resistance
20° C (68° F) 2.0k Ohms to 3.0k Ohms
40° C (104° F) 0.9k Ohms to 1.5k Ohms
60° C (140° F) 0.4k Ohms to 0.8k Ohms
80° C (176° F) 0.2k Ohms to 0.4k Ohms
Table 4
Troubleshooting Test Steps Values Results
3. Check the Inlet Manifold Temperature Sensor
A. Turn the keyswitch to the OFF position.
B. Disconnect the harness connector from the inlet manifold temperature sensor.
C. Measure the resistance between pins 1 and 2 on the inlet manifold temperature sensor. Compare the results to Table 5.
8k Ohms to 37k Ohms
Result: The resistance measurement is outside limits.
Repair: Install a replacement inlet manifold temperature sensor.
Clear the diagnostic code and confirm that the fault has been eliminated.
Result: The resistance measurement is within limits.
For an XXX-3 code, proceed to Test Step 5.
For an XXX-4 code, proceed to Test Step 6.
Table 5
Ambient Temperature Sensor Resistance
0° C (32° F) 31k Ohms to 37k Ohms
20° C (68° F) 17k Ohms to 23k Ohms
60° C (140° F) 8k Ohms to 10k Ohms
Table 6
Troubleshooting Test Steps Values Results
4. Check the Suspect DOC Temperature Sensor
A. Turn the keyswitch to the OFF position.
B. Disconnect the harness connector from the suspect DOC temperature sensor.
C. Measure the resistance between pins 1 and 2 on the suspect DOC temperature sensor. Compare the results to Table 7.
8k Ohms to 37k Ohms
Result: The resistance measurement is outside limits.
Repair: Install a replacement DOC temperature sensor.
Clear the diagnostic code and confirm that the fault has been eliminated.
Result: The resistance measurement is within limits.
For an XXX-3 code, proceed to Test Step 5.
For an XXX-4 code, proceed to Test Step 6.
Table 7
Ambient Temperature Sensor Resistance
0° C (32° F) 220k Ohms
20° C (68° F) 118k Ohms
40° C (104° F) 69k Ohms
Table 8
Troubleshooting Test Steps Values Results
5. Check the Wiring between the Suspect Temperature Sensor and the ECM for an Open Circuit
Refer to Illustration 1.
A. Turn the keyswitch to the OFF position.
B. Disconnect the harness connector from the suspect temperature sensor.
C. Disconnect the engine interface connector.
D. Disconnect the P1
Caterpillar SIS machinery equipment:
Caterpillar SIS
322L EXCAVATOR 9RL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
110-7167
GEAR & BEARING GP
322 L, 322 LN AND 322 N EXCAVATORS 4RM00001-UP (MACHINE) POWERED BY 3116 ENGINE »
110-7167
GEAR & BEARING GP
322 L, 322 LL & 322 FB FOREST SWING MACHINES 9RL00001-UP (MACHINE) POWERED BY 3054 ENGINE »
110-7167
GEAR & BEARING GP
322B L Excavator 1YS00001-UP (MACHINE) POWERED BY 3116 Engine »
110-7167
GEAR & BEARING GP-SWING
322B L & 322B LN Excavators 1ZS00001-UP (MACHINE) POWERED BY 3116 Engine »
110-7167
GEAR & BEARING GP-SWING
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
322 FM L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 34...
322 FM L, 322B L, 322B LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL, M32...
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
320 L, 320B, 320N, 322, 322 FM L, 322 LN, 322B L, 322B LN, OEMS
322, 322 FM L, 322 LN, 322B L, 322B LN
1313973
GEAR GP-AUGER DRIVE
621F, 627F
621F, 627F
2180764
GEAR GP-BEVEL
914G, IT14G
914G, IT14G
1175779
GEAR GP-BEVEL & PINION
924F, IT24F
924F, IT24F
1193864
GEAR GP
35, 45, 55
35, 45, 55
1884498
GEAR GP-FRONT
3412, 3412C
3412, 3412C